Featured Collection
Your cart
Featured Collection
PEAK SURGICALS
SKU:PS-J-069
Couldn't load pickup availability
The Blair Cleft Palate Elevator Right Angle 19cm is a specialized reconstructive surgical instrument designed for controlled elevation of mucoperiosteal flaps during cleft palate and palate reconstruction procedures. Its right-angled working end provides a dedicated approach for accessing and elevating tissue after an incision has been created along the oral or nasal mucosa.
The current Peak Surgicals model is identified as SKU PS-J-069. It features a 5.0 mm wide working end, an overall length of 7½ inches (19.0 cm), a ribbed ergonomic handle, and construction from Premium Surgical Grade German Stainless Steel.
The defining feature of the Blair Cleft Palate Elevator is its right-angled 5.0 mm wide working end. This configuration provides a specialized working profile for approaching tissue planes during palate reconstructive procedures.
The right-angle design allows the distal elevator to be positioned differently from a straight elevator when access around the palate requires an offset approach.
The instrument has a confirmed overall length of 7½ inches (19.0 cm). This measurement provides useful working reach while maintaining direct manual control from the handle.
The 19 cm overall length should be considered together with the 5.0 mm working width when identifying this exact Blair pattern for an existing surgical set or procurement specification.
The current product description specifically identifies the Blair Cleft Palate Elevator for lifting mucoperiosteal flaps after an incision has been made along the oral and nasal mucosae.
This makes the instrument relevant to palate reconstructive procedures where controlled elevation and separation of the tissue flap is required as part of the operative technique.
The Blair pattern is specifically positioned for cleft palate and palate reconstructive surgery. Its right-angled working end and narrow 5 mm width provide a dedicated configuration for surgical sets used in procedures involving the palate.
The exact method of tissue elevation and instrument placement should be determined by the operating surgeon according to the anatomy, incision, tissue plane, and reconstructive technique.
The current Peak Surgicals description confirms a ribbed ergonomic handle. The ribbed surface provides a defined gripping area through which the surgeon controls the right-angled working end during tissue elevation.
Before use, the handle and shaft should be inspected for visible damage, deformation, or any condition that could affect secure instrument handling.
The Blair Cleft Palate Elevator is handcrafted from Premium Surgical Grade German Stainless Steel according to the current Peak Surgicals listing.
The exact stainless-steel alloy grade is not stated on the current product page. Hospitals, reconstructive surgery centers, distributors, and procurement teams requiring a specific alloy designation or material certificate should confirm that information before ordering.
Peak Surgicals lists the Blair Cleft Palate Elevator within its Plastic Surgery Instruments range. Its dedicated palate-elevator configuration makes it relevant for reconstructive instrument sets requiring a right-angled mucoperiosteal elevator.
It should be distinguished from general periosteal elevators or dental elevators when assembling a procedure-specific cleft palate set.
Following surgical use, the instrument should be cleaned, inspected, and reprocessed according to applicable manufacturer instructions and the healthcare facility's validated procedures.
Particular attention should be given to the 5.0 mm right-angled working end, shaft, and ribbed handle. Before reuse, inspect the instrument for retained debris, corrosion, bending, surface damage, or deformation of the working end.
| Product Name | Blair Cleft Palate Elevator Right Angle |
| SKU | PS-J-069 |
| Instrument Type | Cleft Palate / Mucoperiosteal Elevator |
| Pattern | Blair |
| Working-End Configuration | Right Angled |
| Working Width | 5.0 mm |
| Overall Length | 7½ Inches / 19.0 cm |
| Handle Design | Ribbed Ergonomic Handle |
| Material | Premium Surgical Grade German Stainless Steel |
| Primary Function | Mucoperiosteal Flap Elevation |
| Primary Surgical Context | Cleft Palate / Palate Reconstructive Surgery |
| Peak Category | Plastic Surgery Instruments |
The Blair Cleft Palate Elevator Right Angle is relevant for plastic and reconstructive surgery departments, cleft palate surgery centers, hospitals, surgical instrument distributors, and procurement teams assembling specialized palate reconstruction sets.
For accurate purchasing and inventory identification, buyers can reference SKU PS-J-069 together with the 19.0 cm overall length, 5.0 mm right-angled working end, ribbed handle, and German stainless-steel construction. Buyers requiring exact tip thickness, shaft diameter, right-angle dimensions, or stainless-steel alloy grade should confirm those specifications before ordering because they are not stated on the current Peak Surgicals page.
The current Peak Surgicals listing identifies it for lifting mucoperiosteal flaps during cleft palate and palate reconstructive procedures.
The right-angled working end has a confirmed width of 5.0 mm.
The instrument measures 7½ inches (19.0 cm) overall.
Yes. The current product description specifically identifies a right-angled working configuration.
The current Peak Surgicals listing specifies Premium Surgical Grade German Stainless Steel.
The current Peak Surgicals SKU is PS-J-069.
