PEAK SURGICAL
SKU:PS-D-109
Couldn't load pickup availability
CE Certified
FDA Certified
ISO Certified
The Winged Clamp Rubber Dam from Peak Surgicals is a reusable stainless steel rubber dam clamp featuring extended lateral wings on the clamp bow that allow the rubber dam sheet to be pre-stretched over the wings and placed simultaneously with the clamp onto the anchor tooth — eliminating the sequential two-step placement required with wingless clamps. Sold as a single piece, this clamp is used by general dentists and endodontists in dental practices, dental schools, and hospital dental departments worldwide.
Standard wingless rubber dam clamps are placed onto the anchor tooth first, then the rubber dam sheet is punched, stretched, and pulled down over the bow to seal around the tooth — a two-step process that requires the clinician to seat the clamp, release the forceps, pick up the rubber dam frame and sheet, and then stretch the dam over the clamp bow without dislodging the clamp in the process. Winged clamps eliminate this sequence. The lateral wings projecting from the bow provide a ledge onto which the rubber dam sheet can be pre-stretched before placement — the clamp and dam are loaded together onto the clamp forceps and placed simultaneously onto the anchor tooth in a single manoeuvre. The dam sheet is then lifted off the wings with a flat plastic instrument or burnisher to seat it below the gingival margin and create the seal.
The one-step technique enabled by the Winged Clamp Rubber Dam is particularly valued in clinical environments where placement speed and procedural efficiency are important — including high-volume general dental practices, dental school clinical sessions with teaching time constraints, and paediatric dental settings where minimising the number of distinct steps during dam placement reduces patient management time. The technique also reduces the number of times the clinician must return to the instrument tray between clamp placement and dam isolation, keeping clinical workflow uninterrupted from the moment the anchor tooth is selected through to the start of the endodontic or restorative procedure.
The cervical tooth engagement of the Winged Clamp Rubber Dam functions identically to a standard wingless clamp — four jaw tips contact the buccal, lingual, and interproximal cervical margins of the anchor tooth, and the spring tension of the jaws maintains consistent retention throughout the procedure. The wings add to the bow profile for placement purposes only; once the dam is seated below the wings and the clamp jaws are in contact with the tooth, the isolation quality is equivalent to that achieved with a wingless clamp of equivalent jaw profile. The Winged Clamp Rubber Dam provides the same standard of rubber dam field isolation required for root canal treatment, direct restorative procedures, and other moisture-sensitive dental procedures.
Each Winged Clamp Rubber Dam is manufactured from stainless steel, providing the structural rigidity required to maintain both the jaw geometry and the wing profile across repeated clinical use and sterilization cycles without fatigue deformation. The wings must remain dimensionally stable to support the stretched rubber dam sheet reliably during the one-step placement manoeuvre. Stainless steel construction ensures the clamp is rust-free and compatible with standard decontamination and sterilization protocols used in licensed dental facilities.
The Winged Clamp Rubber Dam is manufactured under CE Mark, ISO 13485, and FDA compliant quality standards. ISO 13485 certification confirms Peak Surgicals operates a documented quality management system covering design control, material traceability, and production consistency for dental instruments. CE Mark confirms conformity with European medical device regulations, and FDA compliance supports procurement for US-based dental practices, dental schools, and hospital dental departments requiring verified regulatory documentation.
| SKU | — (verify in Shopify admin) |
|---|---|
| Product Name | Winged Clamp Rubber Dam |
| Price | $3.30 USD |
| Clamp Type | Winged Rubber Dam Clamp |
| Placement Technique | One-step (clamp and dam placed simultaneously) |
| Instrument Category | Endodontic |
| Material | Stainless Steel |
| Certifications | CE Mark, ISO 13485, FDA |
| Reusability | Reusable |
| Quantity | 1 Piece |
| Rust Resistance | Yes |
| Warranty | 1 Year |
| MOQ | 1 Piece |
| OEM / Custom Orders | Available |
| Packing | Carton Box |
| Primary Use | One-step rubber dam placement — dam pre-stretched over wings and placed simultaneously with clamp onto anchor tooth |
| After-Sale Service | Return and Replacement |
What do the wings on a winged rubber dam clamp do?
The wings are lateral projections from the clamp bow that provide a ledge onto which the rubber dam sheet can be pre-stretched before the clamp is placed onto the anchor tooth. In the one-step placement technique, the punched rubber dam sheet is stretched over the wings of the clamp while the clamp is still held in the rubber dam clamp forceps. The clamp and dam are then placed onto the anchor tooth together in a single manoeuvre. After placement, a flat plastic instrument or burnisher is used to lift the dam sheet off the wings and seat it below the gingival margin to create the isolation seal around the tooth. This eliminates the second step required with wingless clamps, where the dam must be separately stretched over the bow after the clamp has already been placed and the forceps released.
When is a winged clamp preferred over a wingless clamp?
Clinicians who prefer the one-step technique choose winged clamps for routine dental dam placement. The one-step technique is particularly valuable in high-throughput general dental practice where procedural efficiency matters, in dental school clinical environments where step count during teaching procedures is relevant, and in paediatric dentistry where minimising the number of sequential steps at the chair reduces patient movement and management time. Some clinicians find the one-step technique provides more predictable dam seating at the cervical margin because the dam is under controlled tension against the wings during placement rather than being stretched from the frame after the clamp is seated. Wingless clamps remain widely used and the choice between the two techniques is a personal preference that does not affect isolation quality once the dam is seated correctly.
Does the one-step technique with a winged clamp change how the dam is used?
The isolation function is identical between winged and wingless clamps — the rubber dam sheet provides the same watertight barrier around the operating field regardless of which placement technique was used. The only difference is the placement sequence. With a winged clamp and one-step technique: punch the dam, pre-stretch it over the wings, load onto forceps, place clamp and dam simultaneously, seat dam below gingival margin using a flat plastic instrument, attach dam to frame. With a wingless clamp and two-step technique: seat clamp first, release forceps, punch and stretch dam separately over the bow, attach to frame. Both achieve the same rubber dam isolation required by endodontic and restorative guidelines.
Is this clamp compatible with autoclave sterilization?
The Winged Clamp Rubber Dam is a reusable stainless steel instrument, fully compatible with standard autoclave and steam sterilization protocols used in licensed dental facilities. Each clamp withstands repeated thermal sterilization cycles without deformation of the bow geometry, jaw profile, or wing dimensions. Facilities should follow their own validated sterilization cycle parameters and reprocessing protocols for Class I reusable dental instruments, and inspect jaw tips and wing integrity before each clinical use.
What certifications does this clamp carry?
The Winged Clamp Rubber Dam is manufactured under CE Mark, ISO 13485, and FDA compliant quality standards. ISO 13485 certification confirms Peak Surgicals operates a documented quality management system covering design control, material traceability, and manufacturing consistency for dental instruments. CE Mark confirms conformity with European medical device regulations, and FDA compliance supports procurement for US dental practices, dental schools, and hospital dental departments requiring verified regulatory documentation.
Can winged clamps and wingless clamps be used interchangeably in the same practice?
Winged and wingless clamps are fully interchangeable in terms of isolation function — the choice is purely one of placement technique preference. Many dental practices stock both: winged clamps for clinicians who prefer the one-step technique, and wingless clamps — such as the Clamp Molar, Clamp for Premolar, Clamps Brinker, and other clamps in the Peak Surgicals range — for clinicians who prefer the two-step technique or for situations where the wing profile would conflict with adjacent teeth or the rubber dam frame. Contact Peak Surgicals for OEM manufacturing, volume pricing, or multi-clamp assortment arrangements covering both winged and wingless designs.
