Tudor Edwards Retractor 203mm

The Tudor Edwards Retractor 203mm is a handheld surgical retractor designed for controlled soft-tissue exposure during thoracic and general surgical procedures. Its broad curved blade provides a substantial retraction surface, while the distal retaining lip helps maintain engagement with the tissue margin during manual retraction.

The current Peak Surgicals model is identified as SKU PS-CS-0019. It measures 203 mm (8 inches) overall and features a 25 mm (1 inch) wide curved blade with retaining lip, a satin surface finish, and premium surgical-grade stainless-steel construction.

203mm Handheld Retractor

The instrument has a confirmed overall length of 203 mm (8 inches). This configuration provides working reach while maintaining direct manual control through the handle.

The Tudor Edwards Retractor is a manual handheld instrument rather than a self-retaining retractor. A surgeon or surgical assistant maintains and adjusts the retraction position during the procedure.

25mm Wide Retracting Blade

The current Peak Surgicals specification confirms a 25 mm (1 inch) wide blade. The broad blade provides a larger contact surface than narrow retractor patterns and is designed for retracting soft tissue, muscle layers, and wound margins.

The 25 mm blade width is an important purchasing specification when comparing this model with Tudor Edwards retractors of different working-end dimensions.

Curved Blade with Retaining Lip

The working end is described as a curved blade with an integrated retaining lip. The curved profile provides the instrument with a defined working angle, while the distal lip helps maintain contact with the tissue margin during retraction.

The current page does not provide the exact blade depth, curvature radius, or lip dimensions, so those measurements should be confirmed separately if required.

Thoracic Surgical Application

Peak Surgicals specifically identifies thoracic surgery as a primary application for this Tudor Edwards Retractor. The product page references retraction of intercostal muscles and soft tissue during thoracic procedures.

The exact placement and amount of retraction should be determined by the operating surgeon according to anatomy, procedure, and the required operative exposure.

General and Abdominal Surgery

The current listing also references general surgical procedures, including exposure of abdominal wall layers and subcutaneous tissue.

The instrument's 203 mm length and broad 25 mm blade provide a defined handheld retractor configuration for soft-tissue management where this size and blade profile are appropriate.

Orthopedic and Spinal Soft-Tissue Retraction

Peak Surgicals additionally references orthopedic and spinal approaches where larger muscle groups may require manual retraction.

The product page does not define a specific orthopedic or spinal procedure for this model, so final instrument selection should depend on the operative approach and surgeon preference.

Satin Surface Finish

The current model is specifically identified with a satin finish. This surface treatment provides the listed finish for the instrument and distinguishes this configuration from highly polished surgical instruments.

Hospitals and procurement teams requiring a particular finish should reference the satin configuration when ordering this specific SKU.

Surgical-Grade Stainless Steel Construction

The current Peak Surgicals product page specifies premium surgical-grade stainless steel construction. The rigid metallic structure supports the mechanical requirements of a reusable handheld retractor.

The exact stainless-steel alloy grade is not stated on the page. Buyers requiring a specific alloy designation or supporting material documentation should confirm that information before ordering.

Reusable and Autoclavable Instrument

The Tudor Edwards Retractor is listed as fully autoclavable and reusable. Following clinical use, the instrument should be cleaned, inspected, and reprocessed according to applicable manufacturer instructions and the healthcare facility's validated procedures.

Before reuse, inspect the blade, retaining lip, shaft, and handle for retained debris, deformation, corrosion, or other visible damage that could affect normal retraction.

Product Specifications

For Thoracic Hospitals and Surgical Procurement

The Tudor Edwards Retractor is relevant for thoracic surgery departments, general surgery services, hospitals, operating rooms, surgical instrument distributors, and procurement teams sourcing reusable handheld retractors.

For accurate purchasing and inventory identification, buyers can reference SKU PS-CS-0019 together with the 203 mm overall length, 25 mm curved blade, retaining lip, satin finish, and stainless-steel construction. Buyers requiring exact blade depth, curvature dimensions, retaining-lip measurements, or stainless-steel alloy grade should confirm those details before ordering because they are not stated on the current product page.

Frequently Asked Questions

What is the Tudor Edwards Retractor used for?

It is a handheld surgical retractor designed for controlled soft-tissue exposure during thoracic, general, and related surgical procedures.

What is the overall length?

The current Peak Surgicals model measures 203 mm (8 inches) overall.

How wide is the blade?

The blade has a confirmed width of 25 mm (1 inch).

What type of blade does the retractor have?

The current model features a curved blade with a retaining lip.

Is the Tudor Edwards Retractor self-retaining?

No. The current Peak Surgicals listing identifies it as a manual handheld retractor that is held and adjusted during use.

What is the SKU for the Tudor Edwards Retractor?

The current Peak Surgicals SKU is PS-CS-0019.