Tendon Stripper Open End 8mm

The Tendon Stripper Open End 8mm is a specialized orthopedic surgical instrument designed for controlled separation and harvesting of tendon tissue during procedures where a tendon graft is required. Its 8 mm open-ended working configuration provides a defined pathway around the tendon while allowing the surgeon to advance the instrument along the tissue under controlled manual guidance.

The current Peak Surgicals model is identified as SKU PS-OP-5856 and is listed in an 8 mm size. The instrument is manufactured from reusable medical-grade steel and carries catalog code PS-600.23-6.

8 mm Open-End Tendon Stripper Design

The defining feature of this instrument is its 8 mm open-ended stripping head. An open-end configuration allows the surgeon to introduce the tendon into the working opening before advancing the stripper along the tissue.

Open tendon strippers are available in different diameters, and the appropriate size should be selected according to the tendon dimensions, planned graft, surgical technique, and surgeon preference.

Designed for Controlled Tendon Harvesting

Tendon strippers are used during orthopedic procedures where tendon tissue needs to be separated from surrounding attachments and harvested for use as a graft. The stripper is advanced along the tendon while the surgeon maintains control over the direction and depth of the instrument.

The open-ended design provides direct access to the tendon rather than completely enclosing it within a closed cutting head. Correct instrument positioning and advancement are important to reduce unintended damage to the graft or adjacent soft tissues.

Use in Ligament Reconstruction Procedures

Open-end tendon strippers of this type are commonly associated with tendon graft harvesting for ligament reconstruction. Comparable orthopedic tendon-stripping systems are used to harvest semitendinosus and gracilis tendons for procedures including ACL and PCL reconstruction.

The specific graft, harvesting technique, and instrument size should be selected by the orthopedic surgeon according to the planned reconstruction and individual patient anatomy.

8 mm Working Size

The current Peak Surgicals product listing specifies an 8 mm size. The working diameter is an important selection parameter because tendon dimensions vary between patients and according to the graft being harvested.

Buyers assembling orthopedic ligament-reconstruction instrument sets should verify that the 8 mm configuration matches the surgeon's preferred graft-harvesting technique and required tendon size.

Open-End Versus Closed-End Configuration

Tendon strippers can be manufactured in both open-end and closed-end configurations. This Peak Surgicals model is specifically identified as the open-end version.

The two designs provide different approaches to engaging and advancing over the tendon. Instrument selection should therefore be based on the surgical technique rather than treating open and closed tendon strippers as interchangeable configurations.

Medical-Grade Steel Construction

The current Peak Surgicals listing identifies this instrument as being manufactured from reusable medical-grade steel. The rigid metallic construction supports the controlled advancement required during orthopedic soft-tissue procedures and allows the instrument to be cleaned and reprocessed for repeated professional use.

The exact steel alloy grade is not specified on the current product page. Hospitals, distributors, or procurement teams requiring a specific material specification or supporting documentation should confirm that information before ordering.

Reusable Orthopedic Surgical Instrument

The Tendon Stripper Open End 8mm is listed as a reusable surgical instrument. Following use, the instrument should be thoroughly cleaned, inspected, and reprocessed according to the applicable manufacturer's instructions and the healthcare facility's validated protocol.

Before reuse, particular attention should be given to the open working end and shaft. Inspect the instrument for retained biological material, deformation, corrosion, surface damage, or any irregularity that could interfere with controlled tendon stripping.

Product Specifications

For Orthopedic Hospitals and Surgical Procurement

The Tendon Stripper Open End 8mm is relevant for orthopedic hospitals, sports-medicine departments, ligament-reconstruction services, ambulatory surgical centers, medical distributors, and procurement teams sourcing tendon-harvesting instrumentation.

For accurate purchasing and inventory identification, buyers can reference SKU PS-OP-5856, catalog code PS-600.23-6, the 8 mm size, and the open-end configuration. Buyers requiring exact overall length, working-end geometry, steel alloy grade, or additional dimensional specifications should confirm those details before ordering because they are not stated on the current Peak Surgicals product page.

Frequently Asked Questions

What is a Tendon Stripper Open End 8mm used for?

It is designed for controlled separation and harvesting of tendon tissue during orthopedic procedures where a tendon graft is required.

What size is this tendon stripper?

The current Peak Surgicals listing specifies an 8 mm size.

Is this an open-end or closed-end tendon stripper?

This model is specifically an open-end tendon stripper.

Can tendon strippers be used for ligament reconstruction?

Yes. Tendon strippers of this type are commonly used when harvesting tendon grafts for orthopedic ligament-reconstruction procedures, including selected ACL and PCL reconstruction techniques.

What material is the instrument made from?

The current Peak Surgicals listing identifies reusable medical-grade steel. The exact steel alloy grade is not specified on the product page.

What are the product codes?

The Peak Surgicals storefront SKU is PS-OP-5856, and the product description lists catalog code PS-600.23-6.