Featured Collection
Your cart
Featured Collection
PEAK SURGICAL
SKU:PS-512
Couldn't load pickup availability
The Surgical Bone Curette 180mm is a reusable surgical instrument designed for controlled curettage and removal of bone or tissue from a defined operative area. Its elongated 180 mm configuration provides working reach while maintaining direct manual control during professional surgical procedures.
The current Peak Surgicals model is identified as SKU PS-512. It is supplied as a single-piece instrument, manufactured from German stainless steel, and listed within the Scalers & Curettes instrument range.
The current Peak Surgicals storefront provides a Size selector, and the same product listing on the localized Peak storefront identifies the available configuration as 180 mm.
The 180 mm overall size is an important purchasing reference when comparing this model with bone curettes of different working lengths. The current product page does not provide separate measurements for the handle, shaft, or curette working end.
A surgical bone curette is used when controlled scraping, scooping, or curettage of bone or associated tissue is required within a surgical field. The working end provides a dedicated curette configuration rather than the cutting action of a rongeur, osteotome, or surgical scissor.
The exact technique, tissue being treated, and amount of material removed should be determined by the operating clinician according to the procedure and anatomy.
Peak Surgicals classifies PS-512 under Scalers & Curettes. This provides the main instrument-family identification for the current product and distinguishes it from other bone-cutting or bone-holding instruments.
The product page does not identify a named curette pattern such as Lucas, Hemingway, or Pritchard for this model, so those pattern names should not be applied to PS-512 without additional confirmation.
The current Peak Surgicals specification confirms German stainless steel construction. The rigid metallic design provides the structure required for a reusable surgical curette used in professional instrument workflows.
The exact stainless-steel alloy grade is not stated on the current product page. Hospitals, dental practices, distributors, and procurement teams requiring a specific steel designation or material certificate should confirm that specification before ordering.
Peak Surgicals specifically identifies the Surgical Bone Curette as reusable. The instrument is intended for repeated professional use when properly cleaned, inspected, and reprocessed according to applicable manufacturer instructions and validated facility procedures.
Before reuse, the working end, shaft, handle, and all instrument surfaces should be inspected for retained debris, corrosion, deformation, dulling, or other visible damage that may affect normal performance.
The current product specification lists satin, dull, and mirror finish options. These surface choices allow buyers to select the finish required for their existing surgical or dental instrument inventory.
If a particular surface finish is required, the selected configuration should be confirmed when placing the order.
The product is identified by Peak Surgicals as a surgical instrument and is also positioned within its dental surgical instrument range. This makes PS-512 relevant for professional instrument sets where a reusable bone curette of this configuration is required.
The current page does not provide a procedure-specific specialty, exact anatomical indication, curette-tip size, or named clinical technique. These details should therefore not be assumed from other bone curette models.
The current Peak Surgicals specification lists the product as 1 piece. This refers to the supplied instrument quantity rather than a multi-instrument set.
Buyers assembling procedure-specific kits should confirm whether additional curette sizes or patterns are required separately.
Following use, the Surgical Bone Curette should be cleaned and inspected according to the facility's instrument-processing workflow. Particular attention should be given to the distal curette working end, where biological material may remain after clinical use.
The current product page does not state exact sterilization-cycle parameters, cleaning chemistry, or manufacturer-specific reprocessing limits. These should be confirmed separately when required.
| Product Name | Surgical Bone Curette |
| SKU / Model Number | PS-512 |
| Instrument Type | Scalers & Curettes |
| Size | 180 mm |
| Quantity | 1 Piece |
| Material | German Stainless Steel |
| Feature | Reusable |
| Finish Options | Satin, Dull, Mirror |
| Listed Usage | Operating Room, Others |
| Primary Function | Controlled Bone Curettage |
| Exact Curette Tip Dimensions | Not Specified on Current Product Page |
| Stainless Steel Grade | Not Specified on Current Product Page |
The Surgical Bone Curette is relevant for hospitals, surgical departments, dental practices, instrument distributors, and procurement teams sourcing reusable curettes for professional instrument sets.
For accurate purchasing and inventory identification, buyers can reference SKU PS-512, the 180 mm size, German stainless-steel construction, and required finish option. Buyers requiring exact curette-tip width, cup dimensions, tip shape, stainless-steel alloy grade, or procedure-specific compatibility should confirm those specifications before ordering because they are not provided on the current Peak Surgicals page.
It is a surgical curette used for controlled scraping, scooping, or curettage of bone or associated tissue during appropriate professional procedures.
The same Peak Surgicals product listing identifies the available configuration as 180 mm.
The current Peak Surgicals SKU is PS-512.
The current product specification lists German stainless steel. The exact alloy grade is not stated.
Yes. Peak Surgicals specifically identifies PS-512 as a reusable instrument.
The current product page does not provide exact cup, tip, or working-end dimensions. These should be confirmed before ordering if a specific tip size is required.
