Featured Collection
Your cart
Featured Collection
PEAK SURGICAL
SKU:
Couldn't load pickup availability
The Mini Lexer Gouges 180mm are reusable orthopedic bone instruments designed for controlled curved-edge cutting, shaping, and removal of small amounts of bone. Their scooped gouge profile provides a different working geometry from a flat osteotome, making the Lexer pattern useful when the surgeon needs to follow a curved or contoured bony surface.
The current Peak Surgicals model is identified as PS-MLG-00318 and is manufactured from German stainless steel. Peak Surgicals lists the Mini Lexer Gouges in its orthopedic and hand-and-foot surgical instrument ranges, with working widths covering 4 mm to 10 mm on 180 mm shafts.
The current Peak Surgicals Hand & Foot Surgery collection identifies the Mini Lexer Gouges with 180 mm shafts. This extended shaft length provides working reach while allowing the surgeon to control the gouge from the handle during small-bone procedures.
The 180 mm shaft specification is useful when distinguishing this Mini Lexer range from shorter fine-hand osteotomes or other gouge patterns.
Peak Surgicals currently describes the Mini Lexer Gouges as covering 4 mm to 10 mm cutting widths. Different working widths allow the instrument to be selected according to the size of the bony area and the amount of material that needs to be shaped or removed.
The current product page does not clearly expose every individual selectable width in its accessible storefront data, so buyers requiring a specific intermediate size should confirm the selected variant before ordering.
The Mini Lexer Gouge uses a curved, scooped working profile rather than the flat cutting edge associated with an osteotome. Peak Surgicals specifically notes that this geometry allows the cutting edge to follow bone contours that a straight blade cannot follow as directly.
This makes the gouge configuration suitable for controlled removal or shaping of bone along curved surfaces.
Peak Surgicals places the Mini Lexer Gouges within its Hand & Foot Surgery Instruments range. Their 4–10 mm working widths and curved cutting profile make them relevant to procedures involving smaller bony structures where a broad general-purpose gouge may be less appropriate.
The exact gouge width should be selected according to the anatomical area, required bone removal, and surgeon preference.
The current Peak Surgicals collection specifically identifies osteophyte removal as one of the applications for the Mini Lexer Gouges. The scooped working edge allows the surgeon to approach and remove selected bony prominences while following the local contour.
The amount of bone removed and the instrument width selected should remain determined by the operating surgeon according to the procedure and anatomy.
Peak Surgicals also references joint surface preparation as an application for the Mini Lexer pattern. A curved gouge can be used where controlled shaping or removal of bone is required around a contoured joint surface.
The current listing does not define a specific joint, procedure, or amount of bone removal for this product.
The Hand & Foot Surgery collection additionally references graft harvesting from small bone. The gouge profile allows controlled removal of bone where the surgeon requires a scooped cutting instrument rather than a flat osteotome.
The specific donor site, graft dimensions, and operative technique should be determined by the surgeon according to the procedure.
The current product specification confirms German stainless steel construction. The rigid metallic design provides the structure required for a reusable orthopedic gouge intended to be used with controlled manual or mallet-driven force.
The exact stainless-steel alloy grade is not stated on the current product page. Hospitals and procurement teams requiring a particular steel specification or supporting documentation should confirm that information before ordering.
Peak Surgicals specifically identifies the Mini Lexer Gouges as reusable. After clinical use, the instrument should be cleaned, inspected, and reprocessed according to applicable manufacturer instructions and the healthcare facility's validated procedures.
Before reuse, inspect the cutting edge, shaft, handle, and all surfaces for retained debris, corrosion, deformation, edge damage, or other deterioration that could affect normal instrument function.
The current Peak Surgicals product specification lists satin, dull, and mirror finish options. These allow surgical departments and distributors to select a surface finish according to purchasing requirements and existing instrument inventory.
If a specific finish is required, it should be confirmed when ordering.
| Product Name | Mini Lexer Gouges |
| Model Number | PS-MLG-00318 |
| Instrument Type | Orthopedic Bone Gouge |
| Pattern | Mini Lexer |
| Shaft Length | 180 mm |
| Cutting Width Range | 4 mm to 10 mm |
| Working Profile | Curved / Scooped Gouge Edge |
| Material | German Stainless Steel |
| Feature | Reusable |
| Finish Options | Satin, Dull, Mirror |
| Referenced Applications | Small-Bone Shaping, Osteophyte Removal, Joint Surface Preparation and Bone Graft Harvesting |
| Collection Context | Orthopedic / Hand & Foot Surgery Instruments |
| MOQ | 1 Piece |
The Mini Lexer Gouges are relevant for orthopedic departments, hand and foot surgery services, hospitals, surgical centers, instrument distributors, and procurement teams sourcing reusable bone gouges in smaller working widths.
For accurate purchasing and inventory identification, buyers can reference PS-MLG-00318 together with the 180 mm shaft, 4–10 mm working-width range, Mini Lexer pattern, and German stainless-steel construction. Buyers requiring an exact individual width, detailed gouge curvature, cutting-edge depth, handle dimensions, or stainless-steel alloy grade should confirm those specifications before ordering.
Peak Surgicals identifies them for curved-edge bone work including small-bone shaping, osteophyte removal, joint surface preparation, and graft harvesting.
The current Peak Surgicals Hand & Foot Surgery collection identifies the Mini Lexer range as covering 4 mm to 10 mm.
The current Peak Surgicals collection specifies 180 mm shafts for the Mini Lexer Gouges.
The current product page specifies German stainless steel.
Yes. Peak Surgicals specifically identifies PS-MLG-00318 as a reusable orthopedic instrument.
The current Peak Surgicals model number is PS-MLG-00318.
