Featured Collection
Your cart
Featured Collection
PEAK SURGICAL
SKU:PS-MPIS-00113
Couldn't load pickup availability
Micro Plate Instrument Set 1.5/2.0/2.7 mm by Peak Surgicals is an orthopedic instrumentation set for micro-plate-and-screw fixation workflows. Identified by SKU PS-MPIS-00113, the system includes drilling, tapping, countersinking, plate-handling, reduction, retraction and screw-handling instruments organized in an aluminum box.
The current configuration contains 27 instrument references and 29 total pieces based on the listed quantities. Its screw box accommodates 1.5 mm, 2.0 mm and 2.7 mm components, while the instrument selection includes 2.0 mm and 2.7 mm HA taps and countersinks, 1.5 mm and 2.0 mm drill bits, matching guides and an SW 2.0 hexagonal screwdriver.
This set provides instruments for the preparation, handling and placement stages associated with compatible micro-plate fixation systems. The included instruments support drilling, countersinking, thread preparation, screw handling, plate contouring, reduction and surgical exposure.
The specific plate, screw and instrument combination must be selected according to the operative plan, anatomical requirements and the corresponding implant-system instructions. The current listing does not establish compatibility with every 1.5 mm, 2.0 mm or 2.7 mm system.
The set includes one 1.5 mm drill bit and one 2.0 mm drill bit. Two combined guides are supplied for 1.5/2.0 mm and 2.0/2.7 mm configurations.
Separate HA 2.0 mm and HA 2.7 mm taps and countersinks are listed. A depth gauge with a 0–40 mm measurement range and an SW 2.0 hexagonal screwdriver are also included.
A bending iron and plate-bending forceps are included for handling and contouring compatible micro plates. Plate-holding forceps and screw forceps support instrument-assisted handling of compatible implants during preparation and placement.
The screw box is listed for 1.5 mm, 2.0 mm and 2.7 mm components. Plates and screws are not identified as included in the published component table and should be ordered or confirmed separately.
The set includes pointed-tip and bent-tip reduction forceps, large, medium and small bone elevators, 3 mm and 5 mm dissectors, a sharp hook, a skin retractor, a wire cutter and a bone ribbing rongeur.
Two medium and two small bone elevators are supplied according to the listing. All other instrument references are listed in quantities of one.
| Item Code | Instrument | Specification | Quantity |
|---|---|---|---|
| PS-001 | Screw Box | 1.5/2.0/2.7 mm | 1 |
| PS-002 | Depth Gauge | 0–40 mm | 1 |
| PS-003 | Large Bone Elevator | Exact width not stated | 1 |
| PS-004 | Medium Bone Elevator | Exact width not stated | 2 |
| PS-005 | Small Bone Elevator | Exact width not stated | 2 |
| PS-006 | Dissector | 5 mm | 1 |
| PS-007 | Dissector | 3 mm | 1 |
| PS-008 | Bending Iron | Size not stated | 1 |
| PS-C-009 | HA Countersink | 2.7 mm | 1 |
| PS-010 | HA Countersink | 2.0 mm | 1 |
| PS-011 | HA Tap | 2.0 mm | 1 |
| PS-012 | HA Tap | 2.7 mm | 1 |
| PS-013 | Sharp Hook | Size not stated | 1 |
| PS-014 | Drill Bit | Diameter 1.5 mm | 1 |
| PS-015 | Drill Bit | Diameter 2.0 mm | 1 |
| PS-016 | Screw Forceps | Size not stated | 1 |
| PS-017 | Combined Guide | 2.0/2.7 mm | 1 |
| PS-018 | Combined Guide | 1.5/2.0 mm | 1 |
| PSF-019 | Plate-Bending Forceps | Size not stated | 1 |
| PS-WC-020 | Wire Cutter | Capacity not stated | 1 |
| PS-BRR-021 | Bone Ribbing Rongeur | Size not stated | 1 |
| PS-PRF-022 | Pointed-Tip Reduction Forceps | Size not stated | 1 |
| PS-BRF-023 | Bent-Tip Reduction Forceps | Size not stated | 1 |
| PS-PHF-024 | Plate-Holding Forceps | Size not stated | 1 |
| PS-HS-025 | Hexagonal Screwdriver | SW 2.0 | 1 |
| PS-SR-026 | Skin Retractor | Pattern and size not stated | 1 |
| PS-AB-027 | Aluminum Box | Organized instrument storage | 1 |
| Product Name | Micro Plate Instrument Set 1.5/2.0/2.7 mm |
|---|---|
| Brand | Peak Surgicals |
| SKU | PS-MPIS-00113 |
| Product Type | Orthopedic Micro Plate Instrument Set |
| System Range | 1.5 mm, 2.0 mm and 2.7 mm |
| Depth-Gauge Range | 0–40 mm |
| Drill-Bit Diameters | 1.5 mm and 2.0 mm |
| HA Taps | 2.0 mm and 2.7 mm |
| HA Countersinks | 2.0 mm and 2.7 mm |
| Combined Guides | 1.5/2.0 mm and 2.0/2.7 mm |
| Hexagonal Screwdriver | SW 2.0 |
| Listed Instrument References | 27 |
| Total Listed Quantity | 29 pieces |
| Storage | One aluminum box |
| Plates and Screws | Not listed as included |
| Material | Exact instrument material is not stated on the current product page |
| Finish | Not stated on the current product page |
| Sterile Supply Status | Not stated; confirm before use |
| Reusability | Not stated; obtain the applicable instructions for use |
| Intended Users | Trained orthopedic surgeons and qualified healthcare professionals |
| Quality Documentation | Peak Surgicals operates under ISO 13485 and supplies CE-marked and FDA-compliant product ranges; request documentation applicable to this SKU and destination market |
The screw box and instrument sizes indicate support for components within 1.5 mm, 2.0 mm and 2.7 mm micro-plate systems. Universal compatibility is not stated. Buyers should verify plate design, screw thread, drill diameter, tap profile, countersink dimensions and driver interface before combining the set with another implant system.
The current component table does not include bone plates or screws. Confirm whether compatible implants are available separately and request their exact sizes, lengths, material and regulatory documentation.
Peak Surgicals uses German-forged stainless steel for its surgical instrument range. However, the current product page does not provide the exact stainless steel grade, finish, sterile supply condition or reusable status for this particular set.
Before ordering or clinical use, obtain the applicable material specification and instructions for use. Cleaning, inspection and sterilization must follow the manufacturer’s validated instructions and the healthcare facility’s approved protocol.
This micro plate instrument set is intended for professional orthopedic use. Instrument selection and application must be determined by the responsible surgeon according to the anatomy, fixation plan, selected implant system and applicable clinical protocol.
Before each procedure, verify that all instruments are present, correctly sized and compatible. Inspect drill bits, taps, countersinks, cutting jaws, hooks, forceps and driver interfaces. Remove any instrument showing wear, deformation, corrosion or impaired function.
What is the Micro Plate Instrument Set used for?
It provides instruments for drilling, tapping, countersinking, reduction, plate contouring, screw handling and exposure during compatible micro-plate fixation workflows.
Which system sizes does the set support?
The screw box is listed for 1.5 mm, 2.0 mm and 2.7 mm components. The set includes drills, guides, taps and countersinks associated with these system sizes.
Are micro plates and screws included?
No plates or screws appear in the current component table. Confirm compatible implant availability separately.
How many instruments are included?
The listing contains 27 separate component references and 29 total pieces based on the stated quantities.
Which drill bits are included?
One 1.5 mm drill bit and one 2.0 mm drill bit are listed.
Which taps and countersinks are supplied?
The set includes HA 2.0 mm and HA 2.7 mm taps and corresponding countersinks.
Is an instrument box included?
Yes. One aluminum box is included, and the gallery shows the instruments organized across two trays.
Is the set universally compatible?
No universal compatibility is stated. Verify the relevant plate, screw, drill, tap, countersink and screwdriver specifications before use.
Is the set supplied sterile and reusable?
The current page does not state the sterile supply condition or reusable status. Request the applicable instructions for use before reprocessing.
Use SKU PS-MPIS-00113 when placing an order or requesting technical documentation. Confirm the supplied instrument configuration, compatible implant system, material, finish, sterile status, reprocessing instructions, warranty, current price and availability before purchase.
