Featured Collection
Your cart
Featured Collection
PEAK SURGICALS
SKU:PS-OP-5842
CE Certified
FDA Certified
ISO Certified
The Low Profile Cancellous Screw Titanium is an orthopedic implant screw available in multiple diameter and length configurations. The current Peak Surgicals range includes 4.5 mm and 6.5 mm diameters with listed lengths from 30 mm to 40 mm, allowing orthopedic teams and procurement departments to select the required configuration according to the planned fixation system.
The main Peak Surgicals product is identified as SKU PS-OP-5842. Three catalog configurations are currently listed: PS-650.200, PS-650.201, and PS-650.205.
The product is specifically identified as a low profile cancellous screw. This designation distinguishes it from other orthopedic screw patterns and provides an important reference when matching the implant to an existing orthopedic fixation system.
The current product page does not provide exact head diameter, head height, thread pitch, threaded-length specification, or drive configuration. These technical details should therefore be confirmed before ordering when compatibility with a specific instrument or implant system is required.
The current Peak Surgicals product title identifies this cancellous screw as titanium. This material designation applies to the listed low-profile cancellous screw configurations.
The exact titanium alloy or grade is not stated on the current product page. Hospitals, orthopedic centers, distributors, and procurement teams requiring a specific titanium specification or supporting material documentation should confirm that information before purchase.
The first listed option has a confirmed diameter of 4.5 mm and a length of 30 mm. Its catalog code is PS-650.200.
This code should be used together with the 4.5 × 30 mm specification when identifying the required screw for purchasing and inventory control.
The second configuration also has a 4.5 mm diameter but increases the listed length to 35 mm. This version is identified by catalog code PS-650.201.
Because both PS-650.200 and PS-650.201 share the same diameter, buyers should confirm the required length carefully when ordering.
The largest configuration currently listed on the product page has a 6.5 mm diameter and a 40 mm length. Its catalog code is PS-650.205.
This option differs from the two 4.5 mm versions in both diameter and length and should be identified by its full dimensional specification and catalog code.
As a cancellous orthopedic screw, this product belongs to the orthopedic implant and fixation category. The required screw diameter and length should be selected according to the planned fixation construct, anatomy, and the orthopedic system being used.
The current Peak Surgicals page does not state a specific anatomical site, fracture pattern, plate system, or procedure for PS-OP-5842. Procedure-specific compatibility should therefore be confirmed by the surgical team rather than assumed from the product title alone.
The current product range provides two diameter categories and three listed dimensional combinations. Selection should be based on both measurements rather than diameter alone.
For inventory accuracy, procurement teams should reference the catalog code together with the complete diameter and length combination when creating purchase orders or replacing an existing implant.
The current product page does not specify compatible plates, washers, screwdrivers, drill sizes, taps, thread pitch, or other associated instrumentation. These details are important when the screw must integrate with an established orthopedic fixation system.
Buyers should therefore verify system compatibility before ordering if PS-OP-5842 is being purchased as part of an existing implant set.
| Product Name | Low Profile Cancellous Screw Titanium |
| Main SKU | PS-OP-5842 |
| Product Type | Orthopedic Cancellous Screw |
| Profile | Low Profile |
| Material | Titanium |
| PS-650.200 | 4.5 mm Diameter × 30 mm Length |
| PS-650.201 | 4.5 mm Diameter × 35 mm Length |
| PS-650.205 | 6.5 mm Diameter × 40 mm Length |
| Available Diameters | 4.5 mm / 6.5 mm |
| Listed Lengths | 30 mm / 35 mm / 40 mm |
| Titanium Grade | Not Specified on Current Product Page |
| Thread / Drive Specifications | Not Specified on Current Product Page |
| Sterility Status | Not Specified on Current Product Page |
The Low Profile Cancellous Screw Titanium range is relevant for orthopedic departments, hospitals, surgical centers, implant distributors, and procurement teams sourcing cancellous fixation screws in defined diameter and length configurations.
For accurate purchasing, buyers should reference PS-OP-5842 together with the required individual catalog code and complete screw dimensions. Buyers requiring exact titanium alloy, thread pitch, head measurements, drive type, compatible instruments, or sterility status should confirm those specifications before ordering because they are not provided on the current Peak Surgicals page.
The current Peak Surgicals page lists 4.5 × 30 mm, 4.5 × 35 mm, and 6.5 × 40 mm configurations.
The 4.5 mm diameter × 30 mm length configuration is PS-650.200.
The 4.5 mm diameter × 35 mm length configuration is PS-650.201.
The 6.5 mm diameter × 40 mm length configuration is PS-650.205.
The product is identified as titanium. The exact titanium alloy grade is not stated on the current product page.
The current Peak Surgicals storefront SKU is PS-OP-5842.
