Featured Collection
Your cart
Featured Collection
PEAK SURGICAL
SKU:
Couldn't load pickup availability
The Lahey Traction Forceps 3x3 Teeth are specialized surgical forceps designed for controlled grasping and traction of soft tissue, fascia, and skin. Their toothed working ends provide a defined grasping configuration for procedures where secure tissue engagement and controlled traction are required.
The current Peak Surgicals model is available in two confirmed lengths: 15 cm and 20.5 cm. Both configurations feature 3 × 3 teeth and are handcrafted from premium surgical-grade German stainless steel.
The defining feature of the Lahey Traction Forceps is the 3 × 3 teeth configuration at the working end. This toothed pattern provides a specialized gripping surface for engaging tissue during surgical traction and manipulation.
The exact tooth dimensions, jaw width, and working-tip measurements are not stated on the current product page. Buyers requiring those specifications should confirm them before ordering.
The current Peak Surgicals listing provides two exact size options: 15 cm and 20.5 cm. These lengths allow surgical teams and procurement departments to select the configuration that best matches their instrument-set requirements.
The shorter 15 cm model provides a more compact instrument profile, while the 20.5 cm option provides additional working reach. Selection should be based on the intended procedure and surgeon preference.
Peak Surgicals specifically identifies the Lahey Traction Forceps for grasping soft tissue. The toothed working end provides direct engagement when controlled handling or traction of tissue is required during surgery.
The amount of pressure applied should be determined by the operating surgeon according to the tissue type, anatomy, and surgical technique.
The current product description also references fascia grasping. The 3 × 3 tooth arrangement provides a dedicated forceps configuration for engaging fascial tissue when controlled traction is required.
Instrument selection should remain appropriate to the tissue condition and procedure rather than assuming the same traction requirement for every surgical application.
Peak Surgicals additionally identifies skin traction as an intended use of the Lahey pattern. This makes the forceps relevant for surgical procedures where skin or superficial tissue needs to be held and retracted during operative access.
The forceps should be positioned and operated according to the surgeon's selected technique and the requirements of the operative field.
The current product page references use in a range of throat and abdominal surgical procedures. The combination of a toothed grasping tip and selectable instrument lengths provides a dedicated traction forceps option for these surgical environments.
The live page does not identify a specific throat procedure, abdominal procedure, organ, or anatomical structure for this exact model, so procedure-specific claims should not be added without further product documentation.
The Lahey Traction Forceps are handcrafted from premium surgical-grade German stainless steel according to the current Peak Surgicals description. The metallic construction provides the rigid instrument structure required for professional surgical handling.
The exact stainless-steel alloy grade is not stated on the current product page. Hospitals, distributors, and procurement teams requiring a specific alloy designation or supporting material documentation should confirm that information before ordering.
Buyers can select between the 15 cm and 20.5 cm configurations directly from the current product options. The required length should be selected according to the desired working reach and the instrument set in which the forceps will be used.
Both listed sizes retain the Lahey 3 × 3 teeth pattern described on the current product page.
Before clinical use, the 3 × 3 teeth, jaws, joint, handles, and overall instrument alignment should be inspected for visible damage, deformation, corrosion, or restricted movement.
Following use, the instrument should be cleaned, inspected, and reprocessed according to applicable manufacturer instructions and the healthcare facility's validated procedures. The current product page does not provide specific sterilization-cycle parameters.
| Product Name | Lahey Traction Forceps |
| Instrument Type | Traction / Tissue Forceps |
| Pattern | Lahey |
| Teeth Configuration | 3 × 3 Teeth |
| Available Size 1 | 15 cm |
| Available Size 2 | 20.5 cm |
| Material | Premium Surgical-Grade German Stainless Steel |
| Primary Functions | Soft Tissue and Fascia Grasping, Skin Traction |
| Referenced Surgical Context | Throat and Abdominal Surgery |
| SKU | Not Displayed on Current Product Page |
| Exact Jaw / Tooth Dimensions | Not Specified on Current Product Page |
The Lahey Traction Forceps are relevant for hospitals, operating rooms, surgical centers, instrument distributors, and procurement teams sourcing toothed tissue and traction forceps.
For accurate purchasing, buyers should specify the required 15 cm or 20.5 cm size and the 3 × 3 teeth Lahey pattern. Buyers requiring an exact SKU, jaw dimensions, tooth measurements, or stainless-steel alloy grade should confirm those details before ordering because they are not displayed on the current Peak Surgicals page.
The current Peak Surgicals listing identifies them for grasping soft tissue and fascia as well as providing skin traction during surgical procedures.
The forceps have a confirmed 3 × 3 teeth configuration.
The current product page lists two sizes: 15 cm and 20.5 cm.
Peak Surgicals describes them as handcrafted from premium surgical-grade German stainless steel.
Yes. The current product description specifically references abdominal surgical procedures among the application contexts.
An SKU is not currently displayed in the accessible Peak Surgicals product information, so it should be confirmed from the Shopify product record before being added to customer-facing specifications.
