Fahen Stock Carver and Knife Large 17.8cm

The Fahen Stock Carver and Knife Large 17.8cm is a double-ended dental laboratory instrument designed for wax cutting, carving, plaster modelling, sculpting, and detailed anatomical contouring. Its two working ends combine a cutting knife and a dedicated carving end within one instrument, allowing dental professionals and laboratory technicians to perform multiple modelling tasks without changing tools.

The current Peak Surgicals model is identified as SKU 102-102. It has a confirmed total length of 7 inches (17.8 cm), a 3.5-inch (8.9 cm) rosewood handle, and 1.75-inch (4.4 cm) working ends on each side.

Double-Ended Dental Wax Instrument

The defining feature of the Fahen Stock pattern is its double-ended design. One side functions as a knife for cutting wax and plaster, while the opposite end is designed for carving and shaping dental contours.

This combination provides a practical instrument for dental laboratory work where both material cutting and detailed carving are required during the same modelling process.

Knife End for Wax and Plaster Cutting

One working end is configured as a knife for cutting and trimming dental wax and plaster. This end can be used during model preparation and laboratory procedures where excess material needs to be separated or shaped.

The exact blade width, blade thickness, and cutting-edge geometry are not stated on the current product page.

Carving End for Anatomical Contouring

The opposite end is designed for carving fissures, cusps, and anatomical contours. This makes the instrument relevant for detailed shaping of wax patterns and dental laboratory models.

The working end can be used for sculpting and engraving tasks where controlled removal or shaping of material is required.

17.8cm Overall Length

The instrument has a confirmed total length of 7 inches (17.8 cm). This provides a balanced overall configuration for hand-controlled dental laboratory work.

The total length should be distinguished from the handle and individual working-end measurements when comparing this model with other Fahen Stock carvers or dental wax instruments.

8.9cm Rosewood Handle

The central handle measures 3.5 inches (8.9 cm) and is identified as being manufactured from heat-resistant rosewood. The handle provides the primary gripping surface between the two stainless-steel working ends.

The current Peak Surgicals description also identifies the handle as ergonomic, balanced, and non-slip in design.

4.4cm Working Ends

Each working end measures 1.75 inches (4.4 cm). The matching working-end lengths create a symmetrical double-ended instrument configuration around the central rosewood handle.

The exact width and thickness of each working end are not provided on the current product page.

Medical-Grade Stainless Steel Working Ends

The cutting and carving components are manufactured from medical-grade stainless steel according to the current Peak Surgicals listing. The metallic working ends provide the rigid structure required for wax carving, plaster trimming, sculpting, and engraving applications.

The exact stainless-steel alloy grade is not stated on the current page. Buyers requiring a specific material designation should confirm that information before ordering.

Dental Wax Carving and Modelling Applications

The current product information identifies the Fahen Stock Carver and Knife for dental wax carving, plaster modelling, sculpting, and engraving. Its double-ended configuration provides two different working profiles within one dental laboratory instrument.

The instrument can be selected for laboratory and restorative workflows where anatomical details, fissures, cusps, and other contours must be shaped manually.

Instrument Care and Sterilization

The current Peak Surgicals page states that the instrument is fully autoclavable at high temperature and pressure. Because this model also includes a rosewood handle, buyers or reprocessing teams requiring specific sterilization-cycle compatibility should confirm the approved processing instructions for the supplied configuration before use.

After use, the stainless-steel working ends and handle should be inspected for residue, damage, loosening, corrosion, or other conditions that could affect normal instrument handling.

Product Specifications

For Dental Laboratories and Procurement

The Fahen Stock Carver and Knife Large is relevant for dental laboratories, restorative and prosthodontic workflows, dental training facilities, instrument distributors, and procurement teams sourcing double-ended dental wax instruments.

For accurate purchasing and inventory identification, buyers can reference SKU 102-102 together with the 17.8 cm total length, 8.9 cm rosewood handle, and 4.4 cm working ends. Buyers requiring exact blade width, carving-end geometry, stainless-steel grade, or validated sterilization parameters should confirm those specifications before ordering.

Frequently Asked Questions

What is the Fahen Stock Carver and Knife used for?

It is designed for dental wax carving, plaster modelling, sculpting, engraving, and shaping anatomical contours such as fissures and cusps.

What is the total length of the instrument?

The current Peak Surgicals listing confirms a total length of 7 inches (17.8 cm).

How long is the handle?

The rosewood handle measures 3.5 inches (8.9 cm).

How long are the working ends?

Each working end measures 1.75 inches (4.4 cm).

What materials are used?

The working ends are listed as medical-grade stainless steel, while the handle is identified as heat-resistant rosewood.

What is the SKU for this product?

The current Peak Surgicals SKU is 102-102.