Easy Universal Tibial Nail Short Bend – Standard Distal Holes

The Easy Universal Tibial Nail Short Bend – Standard Distal Holes is an orthopedic intramedullary implant available in a broad range of lengths and diameters for tibial fixation requirements. The short-bend configuration is combined with a standard distal-hole design and multiple dimensional options, allowing the required nail size to be selected according to the planned orthopedic procedure.

The current Peak Surgicals product is identified by main SKU PS-OP-616 and is supplied in stainless steel. Available diameters range from 9 mm to 13 mm, while listed lengths extend from 26 cm to 44 cm.

Short Bend Tibial Nail Configuration

This product is specifically identified as an Easy Universal Tibial Nail with Short Bend. The short-bend designation distinguishes this implant from separate long-bend tibial nail configurations within orthopedic intramedullary nail systems.

Selection between short-bend and other tibial nail configurations should be based on the orthopedic fixation plan, anatomy, required dimensions, and the implant system being used.

Standard Distal Hole Design

The current Peak Surgicals model is specifically identified as having Standard Distal Holes. This distinction is important because Peak Surgicals also carries a separate Short Bend model described as having Short Distal Holes.

The current page does not state the exact number, diameter, orientation, or spacing of the distal holes. These specifications should therefore be confirmed separately when required for compatibility with a particular locking or instrumentation system.

Stainless Steel Construction

The live product table specifies stainless steel for the available Easy Universal Tibial Nail configurations.

The exact stainless-steel alloy grade is not stated on the current product page. Hospitals, orthopedic departments, implant distributors, and procurement teams requiring a particular implant-grade alloy specification or supporting material documentation should confirm that information before ordering.

9mm Diameter Options

The 9 mm diameter series is available in lengths from 26 cm through 44 cm. The catalog-code family for this diameter is PS-209, followed by the selected length.

For example, the 26 cm configuration is listed as PS-209-26, while the 44 cm configuration is PS-209-44.

10mm Diameter Options

The 10 mm diameter series is also available throughout the full 26–44 cm length range.

This diameter uses the PS-210 catalog-code family, with the required length added to the code. Examples include PS-210-26 for 26 cm and PS-210-44 for 44 cm.

11mm Diameter Options

The 11 mm diameter tibial nail is listed in lengths from 26 cm to 44 cm. Its catalog-code family is PS-211.

The final portion of each catalog code corresponds to the listed nail length, such as PS-211-30 for the 30 cm configuration.

12mm Diameter Options

The 12 mm diameter configuration covers the same 26–44 cm length range and uses the PS-212 catalog-code family.

Hospitals and distributors should specify both the required diameter and length when ordering because each dimensional combination has its own product code.

13mm Diameter Options

The largest diameter listed on the current Peak Surgicals page is 13 mm. It is available in all listed lengths from 26 cm through 44 cm.

The corresponding catalog-code family is PS-213, followed by the selected length.

26cm to 44cm Length Range

The current product table provides nail lengths at 1 cm intervals from 26 cm through 44 cm. This gives buyers multiple length options across each of the five listed diameters.

The appropriate implant length and diameter should be selected by the orthopedic surgical team according to the fixation plan and patient-specific requirements.

Orthopedic Tibial Fixation Application

As an intramedullary tibial nail, the product is intended for orthopedic fixation within the tibia using an appropriate nail and locking system. The exact fracture pattern, indication, surgical technique, and required locking configuration should be determined by the treating orthopedic surgeon.

The current Peak Surgicals page does not specify individual fracture indications, compatible screws, instrumentation, proximal-hole geometry, distal locking dimensions, or insertion technique. Those details should therefore not be assumed from the dimensional table alone.

Product Specifications

For Orthopedic Hospitals and Implant Procurement

The Easy Universal Tibial Nail Short Bend – Standard Distal Holes is relevant for orthopedic departments, trauma centers, hospitals, implant distributors, and procurement teams sourcing stainless-steel intramedullary tibial nails.

For accurate purchasing, buyers should reference PS-OP-616 together with the required diameter and length-specific catalog code. Buyers requiring exact distal-hole geometry, locking-screw compatibility, proximal-hole configuration, stainless-steel alloy grade, sterilization status, or associated insertion instrumentation should confirm those specifications before ordering because they are not provided on the current Peak Surgicals page.

Frequently Asked Questions

Which diameters are available?

The current Peak Surgicals listing provides 9 mm, 10 mm, 11 mm, 12 mm, and 13 mm diameters.

Which lengths are available?

The nail is listed from 26 cm through 44 cm in 1 cm increments.

What material is the tibial nail made from?

The current product table specifies stainless steel. The exact alloy grade is not stated.

What is the main product SKU?

The current Peak Surgicals SKU is PS-OP-616.

What does Standard Distal Holes mean on this product?

It identifies this specific distal-hole configuration and distinguishes it from Peak Surgicals' separate Short Bend tibial nail listing with Short Distal Holes. Exact distal-hole measurements are not provided on the current page.

How are the individual catalog codes structured?

The diameter determines the main code family: PS-209 for 9 mm, PS-210 for 10 mm, PS-211 for 11 mm, PS-212 for 12 mm, and PS-213 for 13 mm. The final number identifies the listed nail length in centimeters.