Featured Collection
Your cart
Featured Collection
PEAK SURGICALS
SKU:PS-OP-7200
CE Certified
FDA Certified
ISO Certified
The DHS Safety Lock Plate 38mm & Short Barrel is an orthopedic plate system available in multiple barrel-angle and hole-count configurations. The current range includes a standard 38 mm barrel in 130°, 135°, 140°, 145°, and 150° options, together with a 25 mm short barrel configuration at 135°.
The current Peak Surgicals product is identified as SKU PS-OP-7200. Hole-count options range from 2 to 22 holes depending on the selected barrel length and angle, providing a broad set of configurations for orthopedic implant inventory and procedure-specific selection.
The standard barrel configuration has a listed 38 mm barrel length. Peak Surgicals provides this barrel length in five angle options: 130°, 135°, 140°, 145°, and 150°.
The available hole counts vary by angle. The 130°, 135°, and 150° configurations extend through 22 holes, while the current table lists the 140° and 145° configurations through 12 holes.
The short-barrel version has a listed 25 mm barrel length and is currently shown at a 135° angle.
This configuration is available across the listed hole-count range from 2 through 22 holes. Buyers should distinguish the 25 mm short barrel from the 38 mm standard barrel when selecting the required catalog code.
The current product table provides multiple plate-angle options for the 38 mm barrel: 130°, 135°, 140°, 145°, and 150°. These angle values are integral to the individual catalog configurations and should be confirmed before ordering.
The short 25 mm barrel is currently listed only in a 135° configuration on the Peak Surgicals page.
The DHS Safety Lock Plate range includes multiple hole counts to distinguish the available side-plate configurations. Listed options include 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20, and 22 holes.
Not every angle is available in every hole count. In particular, the current table does not provide 140° or 145° codes above 12 holes.
The current Peak Surgicals description contains separate sections for Stainless Steel and Titanium. Both material sections presently display the same dimensional matrix and the same PS-166.xxx catalog codes.
Because the live page does not provide separate material-specific codes, buyers requiring a particular material should confirm the selected material and corresponding catalog number before ordering.
The product is presented as a DHS orthopedic plate with barrel length, plate angle, and hole count acting as the principal configuration variables. These specifications should be selected as part of the required orthopedic fixation system rather than treating every plate as interchangeable.
The current Peak Surgicals page does not specify compatible lag-screw dimensions, cortical screw specifications, plate thickness, hole spacing, exact plate lengths, or a complete system compatibility chart. These details should be confirmed when required for a specific fixation system.
The primary barrel choices on the current listing are 38 mm standard barrel and 25 mm short barrel. Barrel selection should be based on the required implant system and surgical planning rather than product price or hole count alone.
The appropriate plate angle, barrel length, and hole configuration should be determined by the surgical team according to the required fixation construct.
| Holes | 38mm 130° | 38mm 135° | 38mm 140° | 38mm 145° | 38mm 150° | 25mm 135° |
|---|---|---|---|---|---|---|
| 2 | PS-166.001 | PS-166.022 | PS-166.042 | PS-166.052 | PS-166.062 | PS-166.082 |
| 3 | PS-166.002 | PS-166.023 | PS-166.043 | PS-166.053 | PS-166.063 | PS-166.083 |
| 4 | PS-166.004 | PS-166.024 | PS-166.044 | PS-166.054 | PS-166.064 | PS-166.084 |
| 5 | PS-166.005 | PS-166.025 | PS-166.045 | PS-166.055 | PS-166.065 | PS-166.085 |
| 6 | PS-166.006 | PS-166.026 | PS-166.046 | PS-166.056 | PS-166.066 | PS-166.086 |
| 7 | PS-166.007 | PS-166.027 | PS-166.047 | PS-166.057 | PS-166.067 | PS-166.087 |
| 8 | PS-166.008 | PS-166.028 | PS-166.048 | PS-166.058 | PS-166.068 | PS-166.088 |
| 9 | PS-166.009 | PS-166.029 | PS-166.049 | PS-166.059 | PS-166.069 | PS-166.089 |
| 10 | PS-166.010 | PS-166.030 | PS-166.050 | PS-166.060 | PS-166.070 | PS-166.090 |
| 12 | PS-166.012 | PS-166.032 | PS-166.051 | PS-166.061 | PS-166.072 | PS-166.091 |
| 14 | PS-166.014 | PS-166.034 | — | — | PS-166.073 | PS-166.092 |
| 16 | PS-166.016 | PS-166.036 | — | — | PS-166.074 | PS-166.093 |
| 18 | PS-166.018 | PS-166.038 | — | — | PS-166.075 | PS-166.094 |
| 20 | PS-166.020 | PS-166.040 | — | — | PS-166.076 | PS-166.095 |
| 22 | PS-166.021 | PS-166.041 | — | — | PS-166.077 | PS-166.096 |
| Main Product SKU | PS-OP-7200 | |||||
| Material Listings | Stainless Steel / Titanium | |||||
The DHS Safety Lock Plate 38mm & Short Barrel range is relevant for orthopedic hospitals, trauma departments, implant distributors, surgical centers, and procurement teams sourcing DHS side-plate configurations.
For accurate purchasing, buyers should specify material, barrel length, plate angle, hole count, and exact PS-166.xxx catalog code. Buyers requiring exact plate length, plate thickness, hole spacing, screw compatibility, material alloy grade, sterilization status, or complete DHS system compatibility should confirm those specifications before ordering because they are not provided on the current Peak Surgicals page.
The current Peak Surgicals listing provides a 38 mm standard barrel and a 25 mm short barrel.
The 38 mm barrel is listed in 130°, 135°, 140°, 145°, and 150° configurations.
The current product table lists the 25 mm short barrel at 135°.
The range includes 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20, and 22-hole configurations, although not every angle is available at every hole count.
The current product description contains separate Stainless Steel and Titanium tables.
The current Peak Surgicals storefront SKU is PS-OP-7200.
