Cortex Screw ∅3.5mm Self Tapping

Cortex Screw ∅3.5mm Self Tapping

The Cortex Screw ∅3.5mm Self Tapping is an orthopedic fixation screw available in stainless steel and titanium configurations across a broad range of lengths. The 3.5 mm cortex screw format is intended for orthopedic fixation systems where a fully threaded cortical screw is required for engagement with cortical bone.

The current Peak Surgicals product is identified by main SKU PS-OP-010588. Available lengths range from 10 mm to 50 mm in 2 mm increments, providing multiple options for orthopedic plate fixation and other procedures requiring a 3.5 mm self-tapping cortex screw.

3.5mm Cortex Screw Design

The product is specifically identified as a 3.5 mm cortex screw. Cortex screws are used within orthopedic fixation systems where threaded purchase in cortical bone is required.

The exact fixation technique, plate system, screw length, drilling procedure, and anatomical application should be selected by the orthopedic surgeon according to the planned construct and patient anatomy.

Self-Tapping Screw Configuration

The screw is supplied in a self-tapping configuration. In standard orthopedic technique, a self-tapping cortex screw is designed to form its own thread after appropriate pilot-hole preparation, removing the separate tapping step required for a conventional non-self-tapping screw.

Drilling dimensions, insertion technique, torque, and compatibility should always follow the requirements of the orthopedic fixation system being used.

Stainless Steel and Titanium Options

The current Peak Surgicals product table provides both stainless steel (S.S.) and titanium versions across all listed lengths.

The exact stainless-steel alloy and titanium alloy grades are not stated on the current product page. Hospitals and procurement teams requiring specific implant material grades or certificates should confirm those specifications before ordering.

10mm to 50mm Length Range

The product is available in 21 listed lengths, beginning at 10 mm and continuing in 2 mm increments through 50 mm. This range allows the required screw length to be selected according to the fixation construct and measured bone depth.

Length should be selected using the appropriate orthopedic measuring technique and in accordance with the surgical system being used.

Orthopedic Plate Fixation Application

3.5 mm cortex screws are commonly used with compatible orthopedic plate systems for fixation to cortical bone. Depending on the construct, conventional cortex screws may be used in neutral, compression, or other plate-fixation techniques.

The current Peak Surgicals page does not identify a specific plate family, anatomical region, or named fracture system for PS-OP-010588, so compatibility with a particular implant system should be confirmed before use.

Cortical Bone Fixation

The cortex screw pattern is intended for fixation where the screw threads engage cortical bone. Proper screw length is important so that the required cortical purchase is obtained without unnecessary extension beyond the intended fixation area.

The exact clinical indication and screw placement should remain determined by the treating orthopedic surgeon.

Variant Identification

Peak Surgicals provides individual reference numbers for each listed length and material. The stainless-steel series uses codes beginning with 102., while the titanium series on the current page uses corresponding codes beginning with PS-102..

Buyers should reference both the required material and length when placing an order to avoid confusion between otherwise similarly sized variants.

Product Specifications and Available Lengths

For Orthopedic Hospitals and Implant Procurement

The Cortex Screw ∅3.5mm Self Tapping range is relevant for orthopedic departments, trauma centers, hospitals, implant distributors, and procurement teams sourcing 3.5 mm cortical fixation screws.

For accurate purchasing, buyers should reference main SKU PS-OP-010588 together with the required material and screw length. Buyers requiring exact alloy grade, head geometry, drive type, thread pitch, core diameter, compatible plate system, or sterilization status should confirm those specifications before ordering because they are not stated on the current Peak Surgicals product page.

Frequently Asked Questions

What diameter is the Cortex Screw?

The current Peak Surgicals product is identified as a 3.5 mm cortex screw.

Which lengths are available?

The product is listed from 10 mm to 50 mm in 2 mm increments.

Which materials are available?

The current product table provides both stainless steel and titanium versions.

What does self-tapping mean?

A self-tapping orthopedic screw is designed to create its thread within a properly prepared pilot hole, so a separate tapping step is generally not required.

What is the main SKU?

The current Peak Surgicals storefront SKU is PS-OP-010588.

Does the page specify the compatible plate system?

No. The current Peak Surgicals page does not identify a specific plate family or fixation system, so compatibility should be confirmed before ordering.