Coil Removing Forceps 4mm, 160mm to Shoulder

The Coil Removing Forceps are specialized gynecological instruments designed for controlled grasping during intrauterine device (IUD) removal procedures. Their long working configuration provides access through the vaginal and cervical pathway, while the narrow serrated rounded jaws provide a dedicated working end for engaging fine material during removal.

The current Peak Surgicals model is identified as SKU PS-CRF-00196 and features 4 mm wide serrated rounded jaws with a confirmed measurement of 160 mm to the shoulder. The instrument is listed within Peak Surgicals' dedicated IUD Removal Forceps range.

4mm Serrated Rounded Jaws

The current product page specifies serrated rounded jaws measuring 4 mm wide. The narrow jaw profile provides a defined working surface for controlled grasping during gynecological coil and IUD removal procedures.

The serrated surfaces should be inspected before use for wear, deformation, retained material, or jaw misalignment that could interfere with controlled grasping.

160mm Length to Shoulder

Peak Surgicals specifies this forceps as measuring 160 mm to the shoulder. This is the exact measurement stated on the current product page and should not be described as a confirmed total overall length.

Buyers requiring the complete end-to-end instrument length should confirm that measurement separately because the current listing provides only the 160 mm-to-shoulder specification.

Designed for IUD and Coil Removal

Peak Surgicals lists PS-CRF-00196 within its dedicated IUD Removal Forceps collection. The instrument is therefore intended for gynecological procedures involving removal of an intrauterine contraceptive device or coil.

The exact removal technique should be selected by the appropriately trained clinician according to device position, string visibility, patient anatomy, and the clinical situation.

Serrated Jaw Surface for Controlled Grasping

The working jaws feature a serrated surface rather than a completely smooth profile. This provides a textured gripping area at the distal end of the forceps.

Because the working end is only 4 mm wide, it provides a comparatively narrow grasping profile for gynecological instrument use. The current product page does not state the exact serration pitch, jaw length, or jaw-opening dimensions.

Rounded Jaw Configuration

The current Peak Surgicals listing specifically describes the jaws as rounded. This distinguishes the instrument from pointed, toothed, or sharp-ended forceps patterns.

The exact radius and full jaw geometry are not provided on the current page and should not be inferred from another manufacturer's coil-removing forceps.

Gynecology Instrument Application

The Coil Removing Forceps are positioned within Peak Surgicals' Gynecology Instruments range and specifically within its coil and IUD removal category.

This makes the instrument relevant for gynecology departments, women's health clinics, outpatient gynecological services, hospitals, and procedure rooms maintaining dedicated IUD-removal instrumentation.

Stainless Steel Construction

The current product description identifies stainless steel construction. Peak Surgicals' dedicated IUD Removal Forceps collection further identifies its coil-removing forceps range as German stainless steel.

Buyers requiring an exact stainless-steel alloy designation or material certificate should confirm that specification before ordering.

Instrument Inspection and Reprocessing

Following clinical use, the forceps should be cleaned, inspected, and reprocessed according to applicable manufacturer instructions and the healthcare facility's validated procedures.

Particular attention should be given to the narrow serrated jaws and articulated areas. Before reuse, inspect the instrument for retained debris, corrosion, jaw misalignment, restricted movement, deformation, or other visible damage.

Product Specifications

For Gynecology Clinics and Instrument Procurement

The Coil Removing Forceps are relevant for gynecology departments, women's health clinics, hospitals, outpatient procedure centers, medical instrument distributors, and procurement teams sourcing dedicated IUD removal instruments.

For accurate purchasing and inventory identification, buyers can reference SKU PS-CRF-00196 together with the 4 mm serrated rounded jaws and 160 mm-to-shoulder measurement. Buyers requiring exact overall length, jaw length, opening capacity, or stainless-steel alloy grade should confirm those details before ordering because they are not stated on the current product page.

Frequently Asked Questions

What are Coil Removing Forceps used for?

Peak Surgicals lists PS-CRF-00196 within its IUD Removal Forceps range for gynecological coil and intrauterine device removal procedures.

How wide are the jaws?

The current product page confirms 4 mm wide jaws.

Are the jaws serrated?

Yes. The current Peak Surgicals specification describes the jaws as serrated and rounded.

What is the instrument length?

The product page specifies 160 mm to the shoulder. It does not provide a confirmed overall end-to-end length.

What material are the forceps made from?

The current product description identifies stainless-steel construction.

What is the SKU for the Coil Removing Forceps?

The current Peak Surgicals SKU is PS-CRF-00196.