Bonney Myomectomy Uterus Clamp 267mm

The Bonney Myomectomy Uterus Clamp 267mm is a specialized gynecological surgical clamp designed for temporary uterine compression during myomectomy procedures. Its extended length, broad curved jaws, screw-joint mechanism, and four-ring handle provide a dedicated configuration for controlled application within abdominal and pelvic surgery.

The current Peak Surgicals model is identified as SKU PS-GS-0025. It measures 267 mm (10½ inches) overall and features 51 mm (2-inch) curved jaws, a screw joint, four finger rings, and surgical stainless-steel construction.

267mm Bonney Myomectomy Clamp

The instrument has a confirmed overall length of 267 mm (10½ inches). This extended configuration provides working reach for abdominal and pelvic procedures while allowing the surgeon to control the clamp from the handle.

The 267 mm overall length is an important purchasing specification when distinguishing this Bonney pattern from clamps of different lengths.

51mm Curved Jaws

The current Peak Surgicals description specifies 51 mm (2-inch) jaws. The jaws are described as broad and curved, providing an extended contact area for application around the lower uterine region during the intended procedure.

Before use, both jaws should be inspected for alignment, surface damage, deformation, or other mechanical conditions that could interfere with uniform closure.

Designed for Myomectomy Procedures

The Bonney pattern is specifically associated with myomectomy, a gynecological procedure involving surgical removal of uterine fibroids. The current product description identifies the clamp for temporary compression of uterine blood supply while the operative procedure is performed.

The exact placement, degree of compression, duration of application, and operative technique should be determined by the operating gynecological surgeon according to the procedure and patient anatomy.

Temporary Uterine Vessel Compression

The principal function described for the Bonney Myomectomy Clamp is temporary compression around the uterine vascular region during fibroid-removal surgery. This provides a dedicated mechanical clamp for use when vascular control is required as part of the surgeon's operative technique.

The instrument should not be described as guaranteeing a bloodless procedure or a particular surgical outcome, since clinical results depend on the procedure, anatomy, technique, and other patient-specific factors.

Screw-Joint Mechanism

The current Peak Surgicals listing identifies a screw-joint mechanism. This joint connects the instrument arms and forms part of the clamp's mechanical system for opening and closing the broad jaws.

The screw joint should be inspected before use for smooth movement, correct alignment, visible wear, and appropriate mechanical condition.

Four-Ring Handle Design

The Bonney Myomectomy Clamp features a four-ring handle. Four finger rings provide multiple gripping points for controlled manual application and release of the instrument.

The handle configuration should be checked together with the screw joint and jaws before clinical use to confirm that the complete instrument operates correctly.

Surgical Stainless Steel Construction

The current product description specifies premium surgical stainless steel construction. The metallic structure provides the rigidity required for a reusable gynecological clamp subjected to controlled manual compression.

The exact stainless-steel alloy grade is not stated on the current product page. Hospitals and procurement teams requiring a specific material designation or supporting certificate should confirm that specification before ordering.

Satin-Finish Configuration

The existing Peak Surgicals description references a satin-finished surface. This provides a low-reflective surface appearance compared with a highly polished instrument finish.

Buyers requiring confirmation of the exact supplied finish should verify the selected configuration before ordering.

Reusable and Autoclavable Instrument

The current product information describes the Bonney Clamp as reusable and suitable for autoclave reprocessing. Following clinical use, the jaws, screw joint, handles, and other surfaces should be thoroughly cleaned, inspected, and reprocessed according to applicable manufacturer instructions and the healthcare facility's validated procedures.

Particular attention should be given to cleaning and inspection around the screw joint and broad jaw surfaces. Jaw alignment should be checked before subsequent use.

Product Specifications

For Gynecology Departments and Surgical Procurement

The Bonney Myomectomy Uterus Clamp is relevant for gynecology departments, hospitals, operating rooms, surgical centers, medical instrument distributors, and procurement teams sourcing specialized instruments for myomectomy procedures.

For accurate purchasing and inventory identification, buyers can reference SKU PS-GS-0025 together with the 267 mm overall length, 51 mm curved jaws, screw joint, four-ring handle, and surgical stainless-steel construction. Buyers requiring exact jaw curvature, instrument weight, stainless-steel alloy grade, or additional mechanical specifications should confirm those details before ordering.

Frequently Asked Questions

What is a Bonney Myomectomy Uterus Clamp used for?

It is a specialized gynecological clamp designed for temporary uterine compression during myomectomy procedures involving removal of uterine fibroids.

What is the overall length?

The current Peak Surgicals listing specifies an overall length of 267 mm (10½ inches).

What is the jaw length?

The clamp has confirmed 51 mm (2-inch) curved jaws.

What type of joint does the clamp have?

The current product description specifies a screw-joint mechanism.

How many finger rings does the handle have?

The current Peak Surgicals description identifies a four-ring handle configuration.

What is the SKU for the Bonney Myomectomy Uterus Clamp?

The current Peak Surgicals SKU is PS-GS-0025.