Featured Collection
Your cart
Featured Collection
PEAK SURGICALS
SKU:PS-OP-5375
Couldn't load pickup availability
The Austin Moore Pin with 2 Nuts Ø3.0mm is a stainless-steel orthopedic pin supplied in a defined range of lengths for professional orthopedic inventory and procedure-specific selection. Its 3.0 mm diameter and two-nut configuration provide clear identifying specifications when matching the pin to an established orthopedic requirement.
The current Peak Surgicals product is identified as SKU PS-OP-5375. A total of 21 coded length options are listed, ranging from 50 mm to 150 mm in consistent 5 mm increments.
The product is specifically identified as an Ø3.0 mm Austin Moore Pin. The 3.0 mm diameter forms part of the product designation and should be confirmed together with the required length before ordering.
The current product page does not provide thread diameter, thread pitch, threaded-section length, or detailed tip geometry. These specifications should therefore be confirmed separately if they are required for compatibility with an established orthopedic system.
The current product title confirms that the Austin Moore Pin is supplied with 2 nuts. This two-nut configuration is a defining feature of this Peak Surgicals product and should be included when identifying or replacing the pin within an orthopedic inventory.
Exact nut dimensions, thread specifications, and nut material details are not separately stated on the current product page.
The current Peak Surgicals product title identifies the Austin Moore Pin as stainless steel. This material specification applies across the listed 3.0 mm pin range unless a separately selected material variant states otherwise.
The exact stainless-steel alloy or grade is not provided on the current page. Buyers requiring a particular alloy specification, material certificate, or regulatory documentation should confirm that information before ordering.
The Austin Moore Pin is available in a broad range of confirmed lengths from 50 mm through 150 mm. Each successive option increases by 5 mm, allowing buyers to select from 21 individually coded configurations.
Length selection should be based on the required orthopedic specification rather than assuming that one pin length is interchangeable with another.
Peak Surgicals provides a separate catalog code for every listed pin length. The range begins with PS-191-001 at 50 mm and continues sequentially through PS-191-021 at 150 mm.
Using the individual catalog code together with the 3.0 mm diameter is the clearest way for hospitals, distributors, and procurement teams to identify the intended configuration.
The Austin Moore Pin is positioned by Peak Surgicals within its orthopedic product range. When ordering, buyers should confirm the required 3.0 mm diameter, length, two-nut configuration, and corresponding catalog code.
The current product page does not state a specific fracture indication, anatomical location, fixation system, insertion technique, or procedural compatibility. These factors should be determined from the required orthopedic system and clinical specification rather than inferred from the product listing.
Although the live product page provides an unusually complete length table, several technical details remain unspecified. These include the exact stainless-steel grade, thread dimensions, thread pitch, tip configuration, nut dimensions, sterility status, packaging format, and compatibility with named fixation or traction systems.
Buyers who require any of these specifications should confirm them before finalizing a purchase order.
| Product Name | Austin Moore Pin with 2 Nuts Ø3.0mm Stainless Steel |
| Main SKU | PS-OP-5375 |
| Product Type | Orthopedic Pin |
| Pattern | Austin Moore |
| Diameter | Ø3.0 mm |
| Configuration | Pin with 2 Nuts |
| Material | Stainless Steel |
| PS-191-001 | 50 mm |
| PS-191-002 | 55 mm |
| PS-191-003 | 60 mm |
| PS-191-004 | 65 mm |
| PS-191-005 | 70 mm |
| PS-191-006 | 75 mm |
| PS-191-007 | 80 mm |
| PS-191-008 | 85 mm |
| PS-191-009 | 90 mm |
| PS-191-010 | 95 mm |
| PS-191-011 | 100 mm |
| PS-191-012 | 105 mm |
| PS-191-013 | 110 mm |
| PS-191-014 | 115 mm |
| PS-191-015 | 120 mm |
| PS-191-016 | 125 mm |
| PS-191-017 | 130 mm |
| PS-191-018 | 135 mm |
| PS-191-019 | 140 mm |
| PS-191-020 | 145 mm |
| PS-191-021 | 150 mm |
| Exact Stainless Steel Grade | Not Specified on Current Product Page |
| Sterility Status | Not Specified on Current Product Page |
| Thread Specifications | Not Specified on Current Product Page |
The Austin Moore Pin with 2 Nuts Ø3.0mm is relevant for orthopedic hospitals, surgical departments, implant and instrument distributors, and procurement teams requiring a clearly coded range of stainless-steel orthopedic pins.
For accurate purchasing, buyers can reference main SKU PS-OP-5375 together with the required individual code from PS-191-001 through PS-191-021. The selected pin length, 3.0 mm diameter, material, and two-nut configuration should all be confirmed before ordering.
The current Peak Surgicals product is identified as Ø3.0 mm.
Yes. The current product title specifically confirms a configuration with 2 nuts.
The current listing provides 21 lengths from 50 mm to 150 mm, increasing in 5 mm increments.
The current product title specifies stainless steel. The exact stainless-steel grade is not stated.
The current Peak Surgicals main product SKU is PS-OP-5375.
The current product page does not state whether the pin is supplied sterile or non-sterile. This should be confirmed before ordering when sterility status is required.
