PEAK SURGICALS
SKU:PS-D-166
Couldn't load pickup availability
CE Certified
FDA Certified
ISO Certified
The Adhesive Remover from Peak Surgicals is a reusable orthodontic hand instrument manufactured from medical-grade stainless steel, featuring a 6.35mm working blade designed for the controlled removal of residual bonding composite from tooth enamel surfaces following orthodontic bracket debonding. Certified to CE, ISO 13485, and FDA standards, this instrument is used by orthodontists and dental clinicians in orthodontic practices, dental hospitals, and specialist orthodontic departments.
The 6.35mm blade of this Adhesive Remover is dimensioned to cover the bonded footprint of a standard orthodontic bracket in a controlled number of strokes, making adhesive cleanup efficient without requiring multiple instrument changes. The blade is applied at a low angle to the enamel surface and used with short lateral strokes to shear and lift the residual composite resin layer without engaging underlying enamel structure. This specific blade width provides a balance between coverage area and control, suited to both anterior and posterior bracket sites across the full arch.
This Adhesive Remover is used at the debonding appointment immediately after bracket removal to clean residual bonding adhesive from labial enamel surfaces before final rubber cup polishing. Thorough mechanical adhesive removal with a dedicated blade instrument at this stage reduces polishing time, minimises heat generation on enamel during prolonged bur use, and prevents adhesive retention that could promote staining or plaque accumulation after treatment completion. It is a standard component of debonding trays used across orthodontic practices, dental schools, and hospital orthodontic departments worldwide.
Each instrument is manufactured from medical-grade stainless steel, providing corrosion resistance, edge stability, and surface hardness appropriate for repeated clinical use and sterilization cycles. The instrument is rust-free and maintains its 6.35mm blade geometry across extended use in high-turnover orthodontic clinical environments. Stainless steel construction ensures the working edge retains its functional profile without deformation under the lateral shearing forces involved in adhesive removal procedures.
The Adhesive Remover is designated as a reusable instrument, fully compatible with standard autoclave and steam sterilization protocols used in licensed dental and orthodontic facilities. Each instrument withstands repeated thermal sterilization cycles without deformation of the blade edge or degradation of the handle surface. Facilities should follow their validated sterilization cycle parameters and reprocessing guidelines for Class I reusable dental instruments.
This instrument is classified as a Class I medical device manufactured under CE Mark, ISO 13485, and FDA compliant quality standards. ISO 13485 certification confirms Peak Surgicals operates a documented quality management system covering design control, material traceability, and production consistency for dental and orthodontic instruments. CE Mark confirms conformity with European medical device regulations, and FDA compliance supports procurement for US-based orthodontic practices, dental schools, and hospital orthodontic departments requiring verified regulatory documentation.
| SKU | PS-D-166 |
|---|---|
| Product Name | Adhesive Remover |
| Price | $11.00 USD |
| Blade Width | 6.35mm |
| Instrument Type | Orthodontic Adhesive Remover |
| Material | Medical-Grade Stainless Steel |
| Instrument Classification | Class I Medical Device |
| Certifications | CE Mark, ISO 13485, FDA |
| Reusability | Reusable |
| Rust Resistance | Yes |
| Warranty | 1 Year |
| MOQ | 1 Piece |
| OEM / Custom Orders | Available |
| Packing | Carton Box |
| Primary Use | Removal of residual bonding composite from enamel surfaces following orthodontic bracket debonding |
| After-Sale Service | Return and Replacement |
What is an Adhesive Remover used for in orthodontics?
An Adhesive Remover is used to mechanically remove residual composite resin bonding adhesive from tooth enamel surfaces after orthodontic brackets have been debonded at treatment completion. When brackets are removed, a layer of bonding adhesive remains on the labial enamel surface. This instrument's blade is applied at a low angle to shear and lift the adhesive material before final rubber cup polishing restores the enamel surface. Using a dedicated adhesive remover reduces enamel damage risk and shortens polishing time compared to using rotary burs or scalers for initial adhesive cleanup.
What is the blade width of this Adhesive Remover and why does it matter?
This Adhesive Remover from Peak Surgicals has a blade width of 6.35mm. This dimension is specifically suited to the footprint of standard pre-adjusted edgewise brackets, allowing efficient coverage of the bonded surface area in a controlled number of strokes. A well-proportioned blade width provides a balance between working efficiency across the full arch and the precise control needed to avoid inadvertently engaging adjacent enamel surfaces or gingival margins during the adhesive removal procedure.
How is this instrument used clinically during debonding?
The instrument is held in a pen grip and the 6.35mm blade is placed against the adhesive remnant at a low angle to the labial tooth surface. Short, controlled lateral strokes shear and fragment the bonding composite without engaging the underlying enamel. The procedure is repeated across all debonded teeth before switching to rubber cup polishing to complete enamel surface restoration. This two-stage approach — mechanical adhesive removal followed by polishing — produces better enamel surface quality than polishing alone and is the accepted clinical protocol in orthodontic debonding.
Is this instrument compatible with autoclave sterilization?
The Adhesive Remover is a reusable instrument manufactured from medical-grade stainless steel, fully compatible with standard autoclave and steam sterilization protocols used in licensed dental and orthodontic facilities. Each instrument withstands repeated thermal sterilization cycles without blade deformation or surface degradation. Facilities should follow their own validated sterilization cycle parameters and reprocessing protocols for Class I reusable dental instruments.
What certifications does this instrument carry?
This instrument is classified as a Class I medical device manufactured under CE Mark, ISO 13485, and FDA compliant standards. ISO 13485 certification confirms Peak Surgicals operates a documented quality management system covering design control, material traceability, and manufacturing consistency for dental and orthodontic instruments. CE Mark confirms conformity with European medical device regulations, and FDA compliance supports procurement for US orthodontic practices, dental schools, and hospital orthodontic departments requiring verified regulatory documentation.
Can this instrument be ordered in bulk or with custom specifications?
OEM manufacturing and custom orders are available from Peak Surgicals for orthodontic distributors, dental procurement departments, and institutional buyers requiring specific blade dimensions, custom engraving, or packaging formats. The standard minimum order quantity is 1 piece, making the instrument accessible for individual practice restocking as well as high-volume institutional purchasing. Contact Peak Surgicals directly for volume pricing, OEM specifications, or distributor arrangements.
