Featured Collection
Your cart
Featured Collection
PEAK SURGICAL
SKU:PS-O T-01601
Couldn't load pickup availability
The Three Fluted Drill Bits are reusable orthopedic drill bits available in three calibrated diameter options for professional bone-drilling applications. Each listed configuration has an overall length of 9 inches (22.9 cm) and is manufactured from German stainless steel.
The current Peak Surgicals range includes 2.5 mm, 3.2 mm, and 4.5 mm calibrated drill bits. Each diameter has its own product code, allowing hospitals, orthopedic departments, and procurement teams to identify the required drill-bit configuration accurately.
The defining feature of these instruments is their three-fluted drill-bit configuration. The flutes form the cutting geometry along the working section of the drill bit and distinguish this pattern from drill bits manufactured with different flute designs.
Peak Surgicals classifies the product specifically as an Orthopedic Drill Bit. The exact flute length, flute angle, cutting-tip geometry, and shank diameter are not stated on the current product page and should be confirmed before ordering when those dimensions are important for a particular drilling system.
The smallest listed configuration is the 2.5 mm calibrated Three Fluted Drill Bit, identified by product code PS-5728.
This variant has a confirmed overall length of 9 inches (22.9 cm). The 2.5 mm diameter provides a clearly defined option for orthopedic sets requiring this drill-bit size.
The second available configuration is the 3.2 mm calibrated drill bit, identified by product code PS-5729.
Like the other listed variants, PS-5729 measures 9 inches (22.9 cm) overall. Buyers should reference both the diameter and product code when selecting this configuration.
The largest diameter currently listed is the 4.5 mm calibrated Three Fluted Drill Bit, identified as PS-5730.
This configuration also has a stated overall length of 9 inches (22.9 cm). The exact compatible chuck or drill connection is not specified on the current product page and should therefore be confirmed before purchase.
All three currently listed drill-bit configurations share a confirmed overall length of 9 inches (22.9 cm). This provides a consistent instrument length across the 2.5 mm, 3.2 mm, and 4.5 mm diameter options.
The overall length should not be confused with flute length or effective drilling depth, neither of which is specified on the current Peak Surgicals page.
The current product specification identifies German stainless steel as the material used for the Three Fluted Drill Bits. The metallic construction provides the rigid structure required for a reusable orthopedic drilling instrument.
The exact stainless-steel alloy grade and hardness specification are not stated on the current page. Buyers requiring a specific material grade or technical certificate should confirm those details before ordering.
Peak Surgicals lists the Three Fluted Drill Bits within its Orthopedic Instruments – Bone Drills range. They are intended for professional orthopedic drilling applications where a compatible drill bit of the required diameter is needed.
The exact surgical procedure, drilling depth, rotational speed, drill system, and compatible chuck should be determined according to the orthopedic equipment being used and the requirements of the procedure.
The current storefront provides three specifically identified calibrated diameters: 2.5 mm, 3.2 mm, and 4.5 mm. These options allow buyers to select the diameter required for their orthopedic drill inventory.
Because compatibility depends on more than diameter alone, buyers should also confirm the required shank and chuck interface before combining these drill bits with an existing manual or powered drilling system.
The current Peak Surgicals specification identifies the Three Fluted Drill Bits as reusable. Following use, the drill bit should be cleaned, inspected, and reprocessed according to applicable manufacturer instructions and the healthcare facility's validated procedures.
Before reuse, inspect the cutting flutes, drill tip, shaft, and connection end for retained debris, visible wear, deformation, corrosion, or other damage that could affect normal drilling performance.
| Product Name | Three Fluted Drill Bits |
| Instrument Type | Orthopedic Drill Bits |
| Flute Configuration | Three Fluted |
| Material | German Stainless Steel |
| PS-5728 | 2.5 mm Calibrated × 9" (22.9 cm) |
| PS-5729 | 3.2 mm Calibrated × 9" (22.9 cm) |
| PS-5730 | 4.5 mm Calibrated × 9" (22.9 cm) |
| Overall Length | 9 Inches / 22.9 cm |
| Feature | Reusable |
| Primary Category | Orthopedic Instruments – Bone Drills |
| Exact Shank / Chuck Compatibility | Not Specified on Current Product Page |
| Flute Length / Working Depth | Not Specified on Current Product Page |
The Three Fluted Drill Bits are relevant for orthopedic departments, trauma centers, hospitals, surgical facilities, orthopedic instrument distributors, and procurement teams sourcing reusable bone-drilling accessories.
For accurate purchasing, buyers should specify the required product code and diameter: PS-5728 for 2.5 mm, PS-5729 for 3.2 mm, or PS-5730 for 4.5 mm. Buyers requiring exact shank dimensions, chuck compatibility, flute length, cutting-tip geometry, steel alloy grade, or maximum working depth should confirm those specifications before ordering because they are not stated on the current Peak Surgicals page.
The current Peak Surgicals listing provides 2.5 mm, 3.2 mm, and 4.5 mm calibrated configurations.
All three currently listed variants measure 9 inches (22.9 cm) overall.
The current codes are PS-5728 for 2.5 mm, PS-5729 for 3.2 mm, and PS-5730 for 4.5 mm.
The current product specification identifies German stainless steel.
Yes. Peak Surgicals currently identifies the Three Fluted Drill Bits as reusable.
The current product page does not specify the exact shank design or compatible chuck system. Compatibility should therefore be confirmed before ordering for an existing drill system.
