Ignorer et passer au contenu
Votre panier est vide
Continuer les achatsVous possédez un compte ?
Connectez-vous pour payer plus vite.
Collection en vedette
PEAK SURGICALS
SKU:
Impossible de charger la disponibilité du service de retrait

The Endoscopic Rigid Facelift Needle Holder is a specialized surgical instrument designed for needle handling and deep suturing during endoscopic facial plastic surgery. Featuring a 5 mm needle-holding working end, locking latch, straight shaft, and in-line ergonomic handle, this instrument provides a dedicated configuration for surgical needle placement and facial fascia fixation.
The instrument features a 7⅛-inch (18.5 cm) shaft, providing a longer working profile than the related 15 cm endoscopic needle holder. Its robust 5 mm working end is designed to hold surgical needles specified up to 3-0 in the reference manufacturer's product description.
The Endoscopic Rigid Facelift Needle Holder incorporates a 5 mm diameter working end with opposing jaws designed to grasp and manipulate surgical suture needles.
The needle-holding mechanism provides a specialized working configuration for suturing during selected endoscopic facial surgical techniques.
The reference manufacturer describes the instrument as suitable for holding needles up to a 3-0 suture configuration. Actual compatibility depends on the needle dimensions, curvature, and characteristics of the selected surgical needle.
The working jaws should be positioned according to the surgeon's intended suturing technique, and excessive closing force should be avoided.
The needle holder features an integrated locking latch designed to maintain the selected jaw closure during needle handling.
The locking mechanism allows the jaws to remain engaged while the surgeon manipulates the instrument during the relevant suturing stage.
This feature distinguishes the instrument from conventional non-locking endoscopic tissue graspers.
The latch should be inspected before each procedure to verify appropriate engagement, release, and mechanical movement.
The instrument has an 18.5 cm straight shaft intended for deeper needle placement during selected endoscopic facial procedures.
The longer shaft provides an alternative working length compared with the shorter 15 cm Endoscopic Facelift Needle Holder.
The straight configuration is relevant to surgical approaches where the surgeon requires an elongated instrument profile for needle manipulation.
Instrument reach, needle orientation, and surgical access depend on the operative approach and anatomical requirements.
The reference instrument family incorporates insulated shafts as part of its endoscopic design.
The insulated section should be examined for cracks, visible wear, surface defects, and separation from the underlying shaft before clinical use.
Shaft insulation does not independently establish compatibility with electrosurgical generators, monopolar equipment, or other powered surgical systems.
The instrument features an in-line ergonomic handle with opposing perforated control arms.
The handle is designed for thumb-and-index-finger manipulation, allowing the surgeon to operate the needle-holding jaws through movement of the control arms.
Its configuration differs from conventional ring-handled needle holders used in open surgical procedures.
The ergonomic handle is intended to provide tactile feedback and accommodate different hand positions during instrument handling.
A circular flush-port opening is visible near the junction between the shaft and the handle.
This feature forms part of the instrument assembly and should be inspected during preparation and reprocessing.
Cleaning and flushing must follow the applicable manufacturer's product-specific instructions. No flushing pressure, cleaning solution, or connector dimensions are specified without verified documentation.
The Endoscopic Rigid Facelift Needle Holder is intended for surgical needle handling where a longer shaft is required for access to deeper operative areas.
During selected endoscopic facial procedures, the surgeon may use the needle holder to grasp and guide the surgical needle through the intended tissue structures.
The 5 mm working-end configuration and locking latch provide a specialized arrangement for maintaining engagement with the selected needle.
Endoscopic facial surgery may involve suturing and fixation of selected fascial structures as part of the operative plan.
The instrument provides a needle-holding configuration for these applications when the surgeon requires an elongated straight shaft and locking jaws.
Needle selection, suture type, fixation location, and suturing technique remain dependent on the surgical procedure and surgeon's assessment.
The Endoscopic Rigid Facelift Needle Holder is relevant to selected endoscopic facelift and facial suspension procedures.
It may be included in an endoscopic instrument setup alongside appropriate dissectors, graspers, scissors, elevators, and visualization equipment.
The instrument is intended for use by appropriately trained surgical professionals.
The rigid-style 5 mm Endoscopic Needle Holder and the related 3 mm Endoscopic Facelift Needle Holder are distinct instrument configurations.
The 5 mm model has an 18.5 cm shaft and a robust needle-holding working end with locking latch. It is intended for deeper needle placement during selected endoscopic procedures.
The 3 mm model has a 15 cm shaft and a more delicate working-end configuration associated with selected facial suturing applications.
Both instruments should be selected according to the required working length, needle characteristics, and intended surgical technique.
| Product Name | Endoscopic Rigid Facelift Needle Holder |
|---|---|
| Reference Pattern | Endoscopic Fascia Needle Holder |
| Catalog Reference | B 65102 |
| Instrument Type | Endoscopic Suturing Needle Holder |
| Shaft Length | 7⅛ inches / 18.5 cm |
| Working-End Diameter | 5 mm |
| Shaft Configuration | Straight |
| Shaft Insulation | Insulated |
| Working End | Opposing Needle-Holding Jaws |
| Locking Mechanism | Locking Latch |
| Needle Capacity | Up to 3-0, per reference catalog |
| Handle Design | In-Line Ergonomic Handle |
| Handle Operation | Thumb and Index Finger Control |
| Additional Feature | Flush Port |
| Primary Specialty | Endoscopic Plastic and Facial Surgery |
| Clinical Application | Deep Needle Placement and Facial Fascia Suturing |
Before use, inspect the needle-holding jaws for visible wear, misalignment, or damage.
Check the locking latch for appropriate engagement and release. Examine the ergonomic handle and control mechanism for normal mechanical movement.
Inspect the straight shaft, insulation, and flush-port assembly for visible surface defects or damage.
Clean and process the instrument according to the applicable manufacturer's instructions and the healthcare facility's validated instrument-reprocessing procedures.
Particular attention should be given to the needle-holding jaws, locking components, shaft insulation, handle mechanism, and flush-port area during cleaning and inspection.
Do not assume specific sterilization temperatures, exposure times, flushing pressures, or cleaning-agent compatibility without verified product-specific instructions.
Protect the working jaws and handle assembly from mechanical damage during storage and transportation.
Peak Surgicals supplies specialized surgical instruments to hospitals, facial plastic surgery practices, aesthetic surgery clinics, reconstructive surgery departments, distributors, and medical procurement professionals.
When ordering, specify the Endoscopic Rigid Facelift Needle Holder with 18.5 cm straight shaft, 5 mm working end, and locking latch.
The corresponding reference model is B 65102. Confirm the required instrument dimensions and inventory reference before purchase.
Explore related Endoscopic Face and Forehead Lift Instruments for additional needle holders, graspers, dissectors, scissors, and specialized endoscopic surgical instruments.
It is designed for needle handling and deep suturing during selected endoscopic facelift and facial fascia fixation procedures.
The specified shaft length is 7⅛ inches (18.5 cm).
The instrument has a 5 mm needle-holding working end.
Yes. It features a locking latch designed to maintain selected jaw closure during needle manipulation.
The reference catalog describes the instrument as holding needles up to a 3-0 suture configuration. Actual needle compatibility should be confirmed.
The corresponding reference catalog model is B 65102, identified as an 18.5 cm straight endoscopic fascia needle holder with a 5 mm working end.