Uitgelichte collectie
Je winkelwagen
Uitgelichte collectie
PEAK SURGICALS
SKU:PS-OP-6085
Kan beschikbaarheid voor afhalen niet laden
The Tapered Threaded Pin with Hydroxyapatite Coating (HA) is an orthopedic fixation pin available in multiple overall lengths, threaded lengths, taper configurations, and drill-bit specifications. The pin is listed by Peak Surgicals within its External Fixators range and provides defined catalog options for selecting the required orthopedic fixation configuration.
The current Peak Surgicals product is identified as SKU PS-OP-6085. Available overall lengths include 100, 120, 130, 150, 170, and 200 mm, depending on the selected taper and threaded-length combination.
The product is specifically identified as having a hydroxyapatite (HA) coating. Hydroxyapatite-coated threaded pins are used within orthopedic external-fixation systems where a threaded bone-fixation component is required.
The current Peak Surgicals page does not state the coating thickness, coating method, hydroxyapatite specification, or percentage of the threaded section that is coated. Buyers requiring those technical details should confirm them before ordering.
All three configurations listed on the current product page specify a 6 mm cortical shaft. The taper diameter and recommended drill-bit size vary according to the selected pin configuration.
The 6 mm cortical-shaft designation should therefore be considered together with the required taper, total length, threaded length, and corresponding catalog number.
The first configuration uses a 6 mm cortical shaft with a taper from 6 mm to 5 mm. Peak Surgicals specifies a 4.8 mm drill bit for this group.
Available total lengths within this configuration are 130, 150, 170, and 200 mm, with available threaded lengths ranging from 30 to 60 mm depending on the selected catalog code.
The second configuration uses a 6 mm cortical shaft with a taper from 5 mm to 4.5 mm. The associated drill-bit specification on the current Peak Surgicals page is 4.3 mm.
This group is available in total lengths of 130, 150, 170, and 200 mm, with 30 mm and 40 mm threaded-length options listed.
The third configuration uses a 6 mm cortical shaft with a taper from 4.5 mm to 3.5 mm. Peak Surgicals specifies a 3.2 mm drill bit for this configuration.
Available total lengths in this group are 100 and 120 mm, with 20, 30, or 40 mm threaded lengths depending on the selected catalog code.
The current product range provides multiple combinations of total pin length and threaded length. Available total lengths across the complete range are 100, 120, 130, 150, 170, and 200 mm. Threaded-length columns shown on the live page are 20, 30, 40, 50, and 60 mm, although not every threaded length is available with every total length or taper configuration.
For accurate ordering, buyers should use the complete combination of shaft diameter, taper, drill-bit size, total length, threaded length, and catalog code rather than selecting by overall length alone.
Peak Surgicals lists this HA-coated tapered threaded pin within its External Fixators collection. Hydroxyapatite-coated tapered pins are an established type of bone pin used in external-fixation systems.
The specific fixation system, anatomical site, pin-placement technique, and required configuration should be determined by the orthopedic surgeon and the compatible fixation-system requirements.
| Main SKU | PS-OP-6085 |
| Product Type | HA-Coated Tapered Threaded Orthopedic Pin |
| Peak Collection | External Fixators |
| Coating | Hydroxyapatite (HA) |
| Cortical Shaft | 6 mm |
| 6→5 mm Taper / Drill Bit | 4.8 mm |
| 130 mm / 30 mm Thread | 215.455 |
| 130 mm / 40 mm Thread | 215.480 |
| 130 mm / 50 mm Thread | 215.500 |
| 150 mm / 30 mm Thread | 215.458 |
| 150 mm / 40 mm Thread | 215.483 |
| 150 mm / 50 mm Thread | 215.503 |
| 170 mm / 40 mm Thread | 215.486 |
| 170 mm / 50 mm Thread | 215.506 |
| 170 mm / 60 mm Thread | 215.525 |
| 200 mm / 40 mm Thread | 215.489 |
| 200 mm / 50 mm Thread | 215.509 |
| 200 mm / 60 mm Thread | 215.527 |
| 5→4.5 mm Taper / Drill Bit | 4.3 mm |
| 130 mm / 30 mm Thread | 215.555 |
| 130 mm / 40 mm Thread | 215.580 |
| 150 mm / 30 mm Thread | 215.558 |
| 150 mm / 40 mm Thread | 215.583 |
| 170 mm / 30 mm Thread | 215.561 |
| 170 mm / 40 mm Thread | 215.586 |
| 200 mm / 30 mm Thread | 215.564 |
| 200 mm / 40 mm Thread | 215.589 |
| 4.5→3.5 mm Taper / Drill Bit | 3.2 mm |
| 100 mm / 20 mm Thread | 215.450 |
| 100 mm / 30 mm Thread | 215.470 |
| 120 mm / 30 mm Thread | 215.473 |
| 120 mm / 40 mm Thread | 215.495 |
The Tapered Threaded Pin with Hydroxyapatite Coating is relevant for orthopedic departments, trauma centers, external-fixation services, hospitals, orthopedic distributors, and procurement teams sourcing threaded pins for compatible fixation systems.
For accurate purchasing, buyers should reference SKU PS-OP-6085 together with the required 6 mm cortical shaft, taper diameter, drill-bit size, overall length, threaded length, and catalog code. Buyers requiring exact pin material, thread pitch, thread profile, HA coating thickness, coating standard, sterility status, or fixation-system compatibility should confirm those specifications before ordering because they are not stated on the current Peak Surgicals page.
The current Peak Surgicals range includes total lengths of 100, 120, 130, 150, 170, and 200 mm, depending on the selected taper and threaded-length configuration.
All configurations shown on the current product page specify a 6 mm cortical shaft.
The live product table lists 6 to 5 mm, 5 to 4.5 mm, and 4.5 to 3.5 mm tapered configurations.
The corresponding drill-bit sizes are 4.8 mm, 4.3 mm, and 3.2 mm, depending on the taper configuration.
The product table contains threaded-length columns of 20, 30, 40, 50, and 60 mm, although availability varies by overall length and taper.
The current Peak Surgicals SKU is PS-OP-6085.
