Uitgelichte collectie
Je winkelwagen
Uitgelichte collectie
PEAK SURGICALS
SKU:PS-OP-7541
Kan beschikbaarheid voor afhalen niet laden
The Micro Drills Stryker End are orthopedic drilling components available in defined working lengths for preparation associated with small orthopedic screw sizes. The current Peak Surgicals range includes options for 2.0 mm, 2.3 mm, and 2.7 mm screws, with separate catalog codes for each configuration.
The main Peak Surgicals product is identified as SKU PS-OP-7541. The live product page provides three specific drill configurations with 22 mm and 27 mm working lengths, allowing surgical teams and procurement departments to select the required option according to the screw size being used.
The product is specifically identified as a Micro Drill with Stryker End. This end configuration is an important purchasing identifier when selecting drilling components for an orthopedic instrument or power-tool setup.
The current product page does not state a named Stryker handpiece model, connector standard, drive geometry, or universal compatibility. Buyers should therefore confirm compatibility with their existing equipment before ordering.
Catalog item 1500.153 has a confirmed 22 mm working length and is listed for 2.0 mm screws.
This specification should be used together with the item code when selecting or replacing the corresponding drill within an orthopedic fixation set.
Catalog item 1500.109 has a confirmed 27 mm working length and is listed for 2.3 mm screws.
The 27 mm working length should not be confused with the total overall drill length, which is not stated on the current Peak Surgicals product page.
Catalog item 1500.113 also has a 27 mm working length and is specified for 2.7 mm screws.
Although this configuration shares the same listed working length as the 2.3 mm option, the separate catalog code and screw-size designation distinguish the two drills.
The current page title places the Micro Drills Stryker End within the Orthopedic Surgical Instruments range, while the variant table directly identifies each drill according to the screw size it is intended to accompany.
Drill selection should match the required orthopedic screw system and operative technique. The current listing does not provide recommended drilling speed, pilot-hole diameter, screw-thread specification, or procedure-specific instructions.
The current Peak Surgicals listing provides three clearly identified configurations. This makes the product suitable for procurement workflows where drill components are selected according to both working length and screw size.
Buyers should reference the exact catalog item number rather than relying only on the product name because the 2.3 mm and 2.7 mm configurations share the same 27 mm listed working length.
The live product page does not specify the drill material, alloy grade, surface coating, overall length, drill diameter, flute geometry, cutting-tip design, or sterilization status.
These technical details should be confirmed before purchase when they are required for compatibility, reprocessing, or a specific orthopedic fixation system. Specifications from another manufacturer's micro drills should not be assumed to apply to this Peak Surgicals product.
| Product Name | Micro Drills Stryker End |
| Main SKU | PS-OP-7541 |
| Product Type | Orthopedic Micro Drill |
| End Configuration | Stryker End |
| Item 1500.153 | 22 mm Working Length – For 2.0 mm Screws |
| Item 1500.109 | 27 mm Working Length – For 2.3 mm Screws |
| Item 1500.113 | 27 mm Working Length – For 2.7 mm Screws |
| Primary Product Context | Orthopedic Surgical Instruments |
| Material | Not Specified on Current Product Page |
| Overall Length | Not Specified on Current Product Page |
| Exact Handpiece Compatibility | Not Specified on Current Product Page |
The Micro Drills Stryker End range is relevant for orthopedic departments, surgical centers, hospitals, orthopedic instrument distributors, and procurement teams sourcing drill components for small screw fixation systems.
For accurate purchasing, buyers should reference SKU PS-OP-7541 together with the exact item code, working length, and screw size required. Buyers needing confirmation of drill diameter, material, flute geometry, overall length, sterilization status, or compatibility with a specific Stryker handpiece should verify those details before ordering because they are not stated on the current Peak Surgicals page.
The current Peak Surgicals page lists configurations for 2.0 mm, 2.3 mm, and 2.7 mm screws.
Item 1500.153 has a 22 mm working length and is listed for 2.0 mm screws.
Items 1500.109 and 1500.113 both have a 27 mm working length and are listed for 2.3 mm and 2.7 mm screws respectively.
The current Peak Surgicals SKU is PS-OP-7541.
The current product page does not state the material or alloy grade.
The product name confirms a Stryker-end configuration, but the current page does not identify specific compatible handpiece models or a universal compatibility standard. Compatibility should therefore be confirmed before ordering.
