Cross Fit Locking Screw 3.0mm Titanium

Cross Fit Locking Screw 3.0mm Titanium

The Cross Fit Locking Screw 3.0mm Titanium is an orthopedic locking screw available in multiple lengths for compatible fixation systems. The complete range maintains a 3.0 mm diameter while providing length options from 8 mm to 24 mm, allowing the required screw length to be selected according to the orthopedic system and surgical plan.

The current Peak Surgicals product is identified by main SKU PS-OP-7531. Nine individual screw configurations are listed, each with a separate item code corresponding to its 3.0 mm diameter and specific length.

3.0mm Locking Screw Diameter

Every screw listed within this product range has a confirmed 3.0 mm diameter. The diameter remains consistent throughout the range while the screw length changes in 2 mm increments.

The 3.0 mm designation should be confirmed together with the required length and compatible orthopedic fixation system before ordering.

Titanium Orthopedic Screw

The current Peak Surgicals product is specifically identified as a titanium Cross Fit locking screw. The material designation should be considered together with the screw diameter and length when selecting the required implant component.

The exact titanium alloy or grade is not stated on the current product page. Hospitals, orthopedic centers, distributors, and procurement teams requiring a specific titanium specification or material certificate should confirm that information before ordering.

8mm Length – PS-3000.008

The shortest listed configuration has a diameter and length of 3.0 × 8 mm and is identified by item code PS-3000.008.

10mm Length – PS-3000.010

The 3.0 × 10 mm locking screw is identified by item code PS-3000.010.

12mm Length – PS-3000.012

The 3.0 × 12 mm configuration is listed under item code PS-3000.012.

14mm Length – PS-3000.014

The 3.0 × 14 mm screw is identified by item code PS-3000.014.

16mm Length – PS-3000.016

The 3.0 × 16 mm option is listed with item code PS-3000.016.

18mm Length – PS-3000.018

The 3.0 × 18 mm Cross Fit locking screw is identified by item code PS-3000.018.

20mm Length – PS-3000.020

The 3.0 × 20 mm configuration is listed under item code PS-3000.020.

22mm Length – PS-3000.022

The 3.0 × 22 mm screw is identified by item code PS-3000.022.

24mm Length – PS-3000.024

The longest configuration currently listed is 3.0 × 24 mm, identified by item code PS-3000.024.

Orthopedic Locking Screw Selection

The nine available lengths allow orthopedic teams and procurement departments to select a 3.0 mm locking screw according to the required implant configuration. Each size has a dedicated catalog code, helping distinguish individual screws within inventory and ordering systems.

The current Peak Surgicals page does not state the exact thread pitch, head diameter, drive interface, screw-head geometry, plate compatibility, insertion instrument, or named locking-plate system. These specifications should therefore be confirmed before ordering for a specific orthopedic construct.

Compatible System Verification

Locking screws must be matched with the intended compatible orthopedic fixation system. The 3.0 mm diameter and selected length alone are not sufficient to establish compatibility with a particular plate or implant system.

Buyers should therefore verify the required catalog code and system compatibility before purchase rather than assuming universal compatibility with other 3.0 mm locking plates.

Product Specifications

Product Name	Cross Fit Locking Screw 3.0mm Titanium
Main SKU	PS-OP-7531
Product Type	Orthopedic Locking Screw
Material	Titanium
Diameter	3.0 mm
Available Lengths	8, 10, 12, 14, 16, 18, 20, 22 and 24 mm
3.0 × 8 mm	PS-3000.008
3.0 × 10 mm	PS-3000.010
3.0 × 12 mm	PS-3000.012
3.0 × 14 mm	PS-3000.014
3.0 × 16 mm	PS-3000.016
3.0 × 18 mm	PS-3000.018
3.0 × 20 mm	PS-3000.020
3.0 × 22 mm	PS-3000.022
3.0 × 24 mm	PS-3000.024
Exact Titanium Grade	Not Specified on Current Product Page
Thread / Head Specifications	Not Specified on Current Product Page
Plate Compatibility	Not Specified on Current Product Page

For Orthopedic Hospitals and Implant Procurement

The Cross Fit Locking Screw 3.0mm Titanium range is relevant for orthopedic departments, hospitals, implant distributors, surgical centers, and procurement teams sourcing locking screws for compatible orthopedic fixation systems.

For accurate purchasing, buyers should reference main SKU PS-OP-7531 together with the required individual item code and screw length. Buyers requiring exact thread pitch, head diameter, drive type, titanium alloy grade, plate compatibility, insertion instrumentation, or sterilization status should confirm those specifications before ordering because they are not stated on the current Peak Surgicals page.

Frequently Asked Questions

What diameter are the Cross Fit locking screws?

All currently listed configurations have a confirmed diameter of 3.0 mm.

Which screw lengths are available?

The current range includes 8, 10, 12, 14, 16, 18, 20, 22, and 24 mm lengths.

What material are the screws made from?

The product is identified by Peak Surgicals as titanium. The exact titanium alloy grade is not stated.

What is the item code for the 16mm screw?

The 3.0 × 16 mm locking screw is identified by item code PS-3000.016.

What is the main product SKU?

The current Peak Surgicals main SKU is PS-OP-7531.

Is this locking screw compatible with every 3.0mm plate?

The current product page does not state universal plate compatibility or identify a specific compatible plate system. Compatibility should be confirmed before ordering.