Cortex Cannulated Screw Ø4.5mm Short Thread

Cortex Cannulated Screw Ø4.5mm Short Thread

The Cortex Cannulated Screw Ø4.5mm Short Thread is an orthopedic screw available in a self-drilling, short-thread configuration with multiple length and material options. The current Peak Surgicals range includes Stainless Steel and Titanium versions covering lengths from 20 mm to 74 mm.

The main Peak Surgicals product is identified as SKU PS-OP-010262. Each listed length is available in both material series, providing a clearly defined catalog structure for orthopedic departments, distributors, and procurement teams selecting the required configuration.

Ø4.5mm Cortex Cannulated Screw

The product is specifically identified as a Ø4.5mm Cortex Cannulated Screw. The 4.5 mm designation is a primary purchasing specification and should be confirmed together with thread configuration, length, and material before ordering.

The current product page does not provide additional dimensions such as head diameter, cannulation diameter, thread pitch, thread length, or drive configuration. These specifications should therefore be confirmed separately when required for compatibility with a particular orthopedic system.

Short Thread Configuration

This product is specifically listed as a Short Thread model, distinguishing it from the separate Ø4.5mm full-thread Cortex Cannulated Screw also available in the Peak Surgicals range.

Buyers should therefore verify that the required product is the short-thread configuration rather than relying only on the 4.5 mm diameter designation.

Self-Drilling Design

The current Peak Surgicals variant table identifies both the Stainless Steel and Titanium versions as Self Drilling.

The self-drilling designation applies across the listed length range on the current product page. Additional technical details relating to the cutting geometry or insertion system are not stated and should not be assumed from other cannulated screw systems.

20mm to 74mm Length Range

The live Peak Surgicals listing provides lengths from 20 mm through 74 mm, increasing in 2 mm increments. This creates a broad range of selectable screw lengths within the same Ø4.5mm short-thread product family.

The required length should be selected according to the applicable orthopedic fixation plan and associated system requirements.

Stainless Steel Material Series

Peak Surgicals lists a complete Stainless Steel series across all available lengths. The stainless-steel catalog numbers run from 117.320 at 20 mm to 117.374 at 74 mm.

The exact stainless-steel alloy grade is not stated on the current product page. Buyers requiring a specific alloy designation or supporting material documentation should confirm that information before ordering.

Titanium Material Series

A parallel Titanium series is also available across the full 20–74 mm range. The titanium catalog codes use the PS-117.xxx format shown in the current product table.

The exact titanium alloy or grade is not stated. Hospitals, orthopedic distributors, and procurement teams requiring a specific titanium specification should confirm that information before purchase.

Orthopedic Implant Selection

The Cortex Cannulated Screw Ø4.5mm Short Thread is listed within the Peak Surgicals orthopedic screw range. Selection should account for the required 4.5 mm screw designation, short-thread configuration, material, and exact length.

The current page does not state specific fracture indications, anatomical sites, compatible washers, guide-wire dimensions, driver type, or associated instrument-system specifications. These details should be verified separately when required for a defined orthopedic procedure or implant system.

Product Specifications and Variants

For Orthopedic Hospitals and Implant Procurement

The Cortex Cannulated Screw Ø4.5mm Short Thread range is relevant for orthopedic departments, hospitals, implant distributors, surgical centers, and procurement teams sourcing self-drilling cannulated screws in Stainless Steel or Titanium.

For accurate purchasing, buyers should reference SKU PS-OP-010262 together with the required material and exact 20–74 mm length. Buyers requiring exact thread length, thread pitch, head dimensions, cannulation diameter, guide-wire compatibility, driver interface, material alloy grade, or associated system compatibility should confirm those specifications before ordering because they are not stated on the current Peak Surgicals page.

Frequently Asked Questions

What diameter is the Cortex Cannulated Screw?

The current Peak Surgicals product is identified as Ø4.5mm.

Is this the short-thread or full-thread version?

This product is specifically the Short Thread configuration.

Which materials are available?

The current live product table lists both Stainless Steel and Titanium.

Is the screw self-drilling?

Yes. Both material series are identified as Self Drilling on the current product page.

Which lengths are available?

The listed range runs from 20 mm to 74 mm in 2 mm increments.

What is the main product SKU?

The current Peak Surgicals storefront SKU is PS-OP-010262.