BMR Mandibular Reconstruction Plate Straight Titanium 1.5mm

BMR Mandibular Reconstruction Plate Straight Titanium 1.5mm

The BMR Mandibular Reconstruction Plate Straight Titanium 1.5mm is a craniomaxillofacial implant plate supplied in a straight configuration for mandibular reconstruction systems. The current Peak Surgicals range provides three hole-count options, allowing surgical and procurement teams to select a defined straight plate configuration according to the required reconstruction setup.

The current Peak Surgicals product is identified as SKU PS-OP-7563. It is specified as titanium with a 1.5 mm designation and is available in 4-hole, 6-hole, and 8-hole configurations, each with a separate catalog code.

Straight BMR Mandibular Reconstruction Plate

This product uses a straight reconstruction plate design. It should be distinguished from Peak Surgicals' other BMR mandibular reconstruction plates that use angled, complete-mandible, or side-specific configurations.

The straight profile provides a clearly defined implant option for mandibular reconstruction systems where a linear plate configuration is required according to the surgical plan.

1.5mm Titanium Configuration

The current product title specifically identifies this plate as Titanium 1.5mm. This 1.5 mm designation is part of the product specification and should be referenced together with the selected hole count when ordering.

The exact titanium alloy or grade is not stated on the current product page. Hospitals, maxillofacial centers, distributors, or procurement teams requiring a specific titanium grade or material certificate should confirm that information before purchase.

4-Hole Plate – PS-1503.004

The smallest listed configuration is the 4-hole BMR Mandibular Reconstruction Plate, identified by catalog code PS-1503.004.

This code should be used when the required system specification calls for the straight 1.5 mm titanium plate in the four-hole configuration.

6-Hole Plate – PS-1503.006

The intermediate configuration is the 6-hole plate, identified as PS-1503.006.

The six-hole version provides another defined option within the same straight 1.5 mm BMR reconstruction plate range.

8-Hole Plate – PS-1503.008

The largest hole-count option listed on this exact product page is the 8-hole configuration, identified by catalog code PS-1503.008.

Buyers should reference this code when the required implant configuration is the eight-hole straight titanium plate.

Craniomaxillofacial Implant Range

Peak Surgicals lists this product within its Craniomaxillofacial Implants range. The BMR mandibular reconstruction plate family includes multiple plate patterns, making accurate identification of the straight 1.5 mm model important when assembling or replenishing a mandibular fixation system.

The surgical team should select the required plate according to the reconstruction plan, anatomy, associated fixation system, and procedural requirements.

Hole-Count Selection

The current product page provides three selectable sizes based on the number of holes: 4, 6, and 8. Hole count is therefore one of the primary purchasing variables for this model.

The live page does not provide exact plate length, hole spacing, screw diameter, screw type, or detailed contour measurements for the three variants. These specifications should be confirmed before ordering when compatibility with a specific fixation system must be established.

Titanium Mandibular Plate Identification

For accurate inventory management, the main product SKU PS-OP-7563 should be distinguished from the individual catalog numbers assigned to each hole configuration.

The main SKU identifies the overall Peak Surgicals product listing, while PS-1503.004, PS-1503.006, and PS-1503.008 identify the individual 4-, 6-, and 8-hole configurations.

Product Specifications

Product Name	BMR Mandibular Reconstruction Plate Straight Titanium 1.5mm
Main SKU	PS-OP-7563
Product Type	Mandibular Reconstruction Plate
Design	Straight
System	BMR Mandibular Reconstruction
Material	Titanium
Plate Designation	1.5 mm
4-Hole Configuration	PS-1503.004
6-Hole Configuration	PS-1503.006
8-Hole Configuration	PS-1503.008
Peak Collection	Craniomaxillofacial Implants
Exact Plate Length	Not Specified on Current Product Page
Screw Compatibility	Not Specified on Current Product Page
Titanium Grade	Not Specified on Current Product Page

For Maxillofacial Hospitals and Implant Procurement

The BMR Mandibular Reconstruction Plate Straight Titanium 1.5mm is relevant for craniomaxillofacial and oral-maxillofacial surgical departments, hospitals, implant distributors, and procurement teams sourcing mandibular reconstruction plates.

For accurate purchasing, buyers should reference SKU PS-OP-7563 together with the required 4-, 6-, or 8-hole catalog code. Buyers requiring exact plate length, hole spacing, screw compatibility, plate width, titanium alloy grade, or sterilization status should confirm those specifications before ordering because they are not stated on the current Peak Surgicals page.

Frequently Asked Questions

Which hole configurations are available?

The current Peak Surgicals listing provides 4-hole, 6-hole, and 8-hole options.

What is the code for the 4-hole plate?

The 4-hole configuration is identified as PS-1503.004.

What is the code for the 6-hole plate?

The 6-hole configuration is identified as PS-1503.006.

What is the code for the 8-hole plate?

The 8-hole configuration is identified as PS-1503.008.

What material is the plate made from?

The current product title identifies this model as titanium. The exact titanium alloy grade is not stated.

What is the main SKU for this product?

The current Peak Surgicals main product SKU is PS-OP-7563.