Přejít k obsahu
Vybraná kolekce
PEAK SURGICALS
SKU:
Dostupnost vyzvednutí nebylo možné načíst

The Tebbetts Intranasal Osteotome is a specialized nasal bone-cutting instrument designed for controlled intranasal resection of the vomer, ethmoid and turbinate or concha bone. Its long, narrow shaft and straight cutting blade provide access through the nasal cavity while keeping the ergonomic handle outside the operative field for controlled mallet-assisted bone work.
The instrument measures 18cm / 7 inches overall and is available in 4mm and 7mm blade widths. These two variants provide different working profiles for narrow and broader intranasal bone resection while maintaining the same overall instrument length and handle design.
The working end features a straight, narrow osteotome blade designed for controlled cutting within confined nasal spaces. The slender shaft allows the instrument to reach deeper septal and turbinate bone structures through an intranasal approach.
The straight blade configuration provides a direct cutting path and distinguishes this pattern from curved lateral osteotomes and broad double-guarded dorsum osteotomes.
The 4mm variant provides the narrower working edge and is suitable where access is limited or a more localized bone cut is required.
The 7mm variant offers a broader cutting surface for removal of a wider segment of septal, ethmoid or turbinate bone during appropriate procedures.
Both versions measure 18cm / 7 inches overall and use the same straight intranasal configuration.
The primary role of the Tebbetts Intranasal Osteotome is controlled resection of internal nasal bone structures. Established applications include vomer resection, ethmoid bone resection and turbinate or concha bone reduction.
This makes the instrument suitable for rhinoplasty, septal surgery and related ENT procedures where internal nasal bone must be cut or reduced through an intranasal approach.
The handle incorporates textured gripping sections designed to improve stability and rotational control. A serrated rectangular section provides a secure grip during striking, while the rounded knurled section supports fingertip orientation of the blade.
The proximal striking surface is designed for controlled impact from an appropriate surgical mallet while the surgeon maintains alignment of the cutting edge.
The 18cm / 7-inch overall length provides sufficient reach for deeper intranasal structures while keeping the surgeon's hand and mallet away from the immediate operative field.
This longer shaft is particularly useful during septal and turbinate procedures where short osteotomes may provide insufficient reach.
The instrument is manufactured from stainless steel and intended for repeated professional surgical use. The rigid shaft and cutting edge are designed to maintain alignment during controlled mallet-assisted bone resection.
The blade, shaft, textured grip and striking surface should be inspected before each use for chips, bending, deformation or visible wear.
| Variant | Overall Length | Blade Width | Configuration |
|---|---|---|---|
| Fine | 18cm / 7" | 4mm | Straight Intranasal |
| Wide | 18cm / 7" | 7mm | Straight Intranasal |
| Product Name | Tebbetts Intranasal Osteotome |
|---|---|
| Instrument Type | Intranasal Rhinoplasty Osteotome |
| Pattern | Tebbetts Intranasal |
| Overall Length | 18cm / 7" |
| Available Blade Widths | 4mm, 7mm |
| Blade Configuration | Straight, Narrow Intranasal Osteotome |
| Cutting Direction | Forward / Mallet Driven |
| Handle Design | Textured Ergonomic Handle with Striking Surface |
| Material | Stainless Steel |
| Reusable | Yes |
| Primary Applications | Vomer, Ethmoid and Turbinate Bone Resection |
| Procedural Use | Rhinoplasty / Septal Surgery / Intranasal Bone Resection |
| Specialty | Plastic Surgery / Rhinoplasty / ENT |
| Brand | Peak Surgicals |
Clean and process the osteotome according to the healthcare facility's validated surgical instrument-processing procedures and applicable product-specific instructions. Inspect the cutting edge, shaft, grip and striking surface before each use. Do not use the instrument if the blade is chipped, bent or visibly deformed, and protect the working edge during transport and storage.
It is designed for controlled resection of vomer, ethmoid and turbinate or concha bone during intranasal rhinoplasty and ENT procedures.
The verified configurations are 4mm and 7mm blade widths, both measuring 18cm / 7 inches overall.
The 4mm version provides a narrower cutting profile for confined access, while the 7mm version offers a broader working edge for wider bone resection.
This product uses a straight intranasal osteotome blade.
No. The intranasal pattern is intended for internal nasal bone structures such as the vomer, ethmoid and turbinate, while lateral osteotomes are designed primarily for lateral nasal bone cuts.
Yes. It is intended as a reusable stainless steel surgical instrument.