Přejít k obsahu
Vybraná kolekce
PEAK SURGICALS
SKU:PS-M-182
Dostupnost vyzvednutí nebylo možné načíst

The Gunter Guarded Lateral Osteotome is a specialized rhinoplasty bone-cutting instrument designed for controlled lateral nasal osteotomies. Its low-profile working end, long slender shaft and 3.5mm guarded cutting edge provide focused access along the lateral nasal wall while helping the surgeon maintain controlled blade positioning during mallet-assisted bone work.
The established Gunter configuration measures 21.5cm / 8½ inches overall and is available in Straight, Right and Left patterns. All three versions use the same 3.5mm working width, allowing the surgeon to select an orientation according to the planned osteotomy pathway and side of the nose.
The defining feature of the Gunter pattern is its low-profile guarded lateral blade. The compact distal geometry is designed to reduce unnecessary instrument bulk around the nasal bone while maintaining a protective guard adjacent to the cutting edge.
This low-profile design is particularly useful during rhinoplasty where controlled access and minimal interference with surrounding soft tissue are important.
All established Gunter variants use a 3.5mm cutting width. This relatively narrow blade provides a focused osteotomy line and allows the instrument to be advanced along the lateral nasal bone without the broader footprint of dorsum osteotomes.
The same 3.5mm width is maintained across the Straight, Right and Left patterns for consistent bone-cutting performance.
The Gunter osteotome is available in three configurations:
Straight: Provides a direct working axis for linear lateral osteotomy approaches.
Right: Directional version designed for controlled work along the right lateral nasal wall.
Left: Mirrored version designed for controlled work along the left lateral nasal wall.
The directional options are orientation variants, not different sizes. All three measure 21.5cm overall and use the same 3.5mm guarded blade.
The 21.5cm / 8½-inch overall length provides extended reach for lateral nasal bone procedures while keeping the surgeon's hand and mallet away from the immediate operative field.
The long, slim shaft also helps maintain a clear working axis as the osteotome is positioned and advanced during controlled rhinoplasty bone cuts.
The primary application of the Gunter pattern is lateral nasal osteotomy during rhinoplasty. It is intended for controlled cutting and mobilization of the lateral nasal bones during nasal narrowing, repositioning and reconstructive contouring procedures.
The instrument can be incorporated into a complete rhinoplasty tray alongside medial osteotomes, dorsum osteotomes, rasps, elevators, retractors and nasal bone forceps.
The osteotome is manufactured from stainless steel and intended for repeated professional surgical use. The rigid shaft and guarded working end are designed to maintain alignment during controlled mallet-assisted osteotomy.
Before each procedure, inspect the guard, cutting edge, shaft and proximal striking surface for chips, bending, deformation or visible wear.
| Variant | Overall Length | Blade Width | Configuration |
|---|---|---|---|
| Straight | 21.5cm / 8½" | 3.5mm | Low-Profile Guarded Lateral Osteotome |
| Right | 21.5cm / 8½" | 3.5mm | Directional Guarded Lateral Osteotome |
| Left | 21.5cm / 8½" | 3.5mm | Directional Guarded Lateral Osteotome |
| Product Name | Gunter Guarded Lateral Osteotome |
|---|---|
| Instrument Type | Rhinoplasty Lateral Nasal Osteotome |
| Pattern | Gunter |
| Overall Length | 21.5cm / 8½" |
| Blade Width | 3.5mm |
| Available Configurations | Straight, Right, Left |
| Working-End Design | Low-Profile Guarded Lateral Blade |
| Material | Stainless Steel |
| Reusable | Yes |
| Primary Application | Lateral Nasal Osteotomy |
| Procedural Use | Rhinoplasty / Nasal Bone Contouring |
| Specialty | Plastic Surgery / Rhinoplasty / ENT |
| Brand | Peak Surgicals |
Clean and process the osteotome according to the healthcare facility's validated surgical instrument-processing procedures and applicable product-specific instructions. Inspect the 3.5mm cutting edge, protective guard, shaft and striking surface before each use. Do not use the instrument if the guard is bent, the cutting edge is chipped or the shaft is visibly deformed.
It is designed for controlled lateral nasal osteotomy and bone contouring during rhinoplasty.
All verified variants measure 21.5cm / 8½ inches overall.
The established Gunter pattern uses a 3.5mm guarded working edge.
The instrument is available in Straight, Right and Left configurations.
Its defining feature is the low-profile guarded lateral working end, which provides a compact blade profile for controlled nasal bone cutting.
No. All three measure 21.5cm overall and use a 3.5mm blade; only the working orientation differs.
Yes. It is intended as a reusable stainless steel surgical instrument.