أدوات القلب والأوعية الدموية - مقصات القلب والأوعية الدموية الدقيقة

Micro scissors are fine-bladed cutting instruments used for arteriotomy extension, adventitial stripping, and controlled tissue division in vessels too small for standard scissors. Short blades set against a long shank keep the working end visible while the hand stays clear of the field. Peak Surgicals stocks 25 patterns from $4.95 to $46.20.

Selecting between them is rarely about sharpness — every pattern here cuts. It is about where the blade sits relative to the surgeon's hand once the shank is inside the wound. A coronary anastomosis behind the heart demands different geometry than a vessel approached head-on at surface level. The patterns below are grouped by that logic, not by price.

How Blade Angle Governs Sightline

The defining variable in micro surgical scissors is the relationship between blade and shank. A straight pattern keeps the two collinear, which suits work where the surgeon approaches the vessel directly and the hand sits outside the wound. Angle the blade and the hand rotates out of the sightline while the tip stays on target — the reason Potts-Smith geometry became standard for arteriotomy extension.

Blade length compounds this. Short blades reduce the arc the tip sweeps per unit of handle travel, converting coarse hand movement into fine tip movement. That mechanical reduction is what "micro" describes. It is a deliberate loss of speed in exchange for control. Reverse-cut patterns invert the shear direction, cutting on the closing stroke away from the surgeon rather than toward.

Pattern Selection by Procedure Stage

Named patterns encode decisions made by the surgeons who designed them. Potts-Smith patterns extend an existing arteriotomy — the blunt lower blade slides inside the lumen without catching intima. Diethrich patterns (PS-6009, PS-6014) handle coronary artery work where the vessel is small and the approach oblique. Favaloro's curved shank (PS-6008) exists because CABG grafting requires reaching around the heart rather than over it.

Shank length shifts with depth. The 18cm Potts-Smith (PS-6026) reaches fields the shorter patterns cannot, at the cost of tip stability. Potts-Reynolds tenotomy patterns (PS-6038) cross into general fine dissection during saphenous vein harvest at $4.95. DeBakey vascular scissors (PS-6040) sit at the boundary between vascular micro scissors and standard vascular instruments — heavier than a true micro pattern, lighter than a Metzenbaum.

Titanium Versus German Stainless Steel

Peak Surgicals offers micro surgery scissors in both German stainless steel and titanium. The titanium 16cm patterns cost roughly double their steel equivalents — $44.00 straight and $46.20 curved, against $19.80 for comparable steel. The premium buys weight reduction and non-magnetic behaviour. Under an operating microscope across a long procedure, hand fatigue stops being a comfort issue and becomes an accuracy issue.

Steel holds an edge longer and resprings more predictably at the joint. For departments reprocessing instruments daily, steel remains the working choice; titanium earns its place in microsurgical suites and MRI-adjacent settings. Locking and non-locking variants exist across both — the micro surgery scissors without lock pattern suits surgeons who prefer continuous blade control over a set position. Heavier patterns sit in the cardiovascular scissors range.

CE, ISO 13485 & Compliance

Every instrument here is CE marked and manufactured under Peak Surgicals' ISO 13485 quality management system at our Sialkot facility, forged from German stainless steel and classified Class I. That classification matters at procurement: Class I reusable surgical instruments carry documentation requirements hospital supply teams verify before adding a vendor.

All patterns are reusable and validated for standard steam autoclave reprocessing. Warranty runs one year with return-and-replacement service. MOQ is one piece — useful when a surgeon wants to trial a Potts-Smith scissors pattern before committing a department. Orders over $99 ship free, and OEM marking is available for distributors building private-label cardiovascular micro scissors ranges.

Micro Scissors Pattern Comparison

Specifications and Procurement Terms

Frequently Asked Questions

Which micro scissors pattern suits coronary artery bypass grafting?
Favaloro Curved Shank Coronary Scissors (PS-6008) at $14.85 were designed for CABG. The shank curve lets the hand clear the sternal edge while the blade reaches the anastomotic site — a geometry problem no straight pattern solves. Diethrich Coronary Artery Scissors (PS-6009) at $18.70 then handle the arteriotomy itself, the fine angled blade matched to small-calibre coronary vessels approached obliquely. Most CABG trays carry both, since one instrument solves approach and the other solves the cut. Where the graft requires deeper access, Potts Smith Scissors 18cm (PS-6026) extend reach at the cost of tip stability.

How do Potts-Smith and DeBakey vascular scissors differ?
Potts-Smith carries one blunt lower blade that slides inside the vessel lumen without snagging intima, making it the arteriotomy-extension instrument. DeBakey Vascular Scissors (PS-6040) use heavier blades sized for outright vessel division rather than controlled extension. The distinction is directional: Potts-Smith cuts along a vessel, DeBakey cuts across it. DeBakey Potts (PS-6027A) sits between the two, carrying Potts geometry on a heavier blade. Trays for peripheral bypass typically stock both, since arteriotomy and division are separate stages of the same procedure.

Why do the Potts-Smith patterns carry different model numbers at similar prices?
Potts Smith Cutting (PS-6019) and Potts Smith Multiple Sizes (PS-6022) both start at $15.40 but serve different cases. PS-6022 supplies several blade calibres, useful when vessel diameter varies across a single procedure. PS-6019 is a fixed configuration. Potts Smith (PS-6027) at $13.20 is the base pattern. Potts Smith 18cm (PS-6026) at $17.38 extends the shank for deep-field access. Potts Smith Reverse at $22.00 inverts shear direction for away-stroke cutting. The pricing reflects configuration count and shank length rather than blade quality — every pattern is forged from the same German stainless steel.

When does titanium justify double the price of German stainless steel?
Micro Surgery Titanium Scissors 16cm run $44.00 straight and $46.20 curved, against $13.20 to $22.00 for steel patterns. The premium buys mass reduction and non-magnetic behaviour. In microscope work running past two hours, reduced instrument mass measurably slows hand fatigue, and fatigue at that scale is an accuracy problem rather than a comfort one. MRI-adjacent suites require non-magnetic instruments outright. For departments running daily reprocessing volume, German stainless steel holds its edge longer and resprings more predictably at the joint, which is why most cardiac theatres run steel and reserve titanium for microsurgical cases.

Are these micro scissors autoclavable and reusable?
Yes — every pattern is reusable and validated for standard steam autoclave cycles. Fine blades chip against heavier instruments during tray loading, so tip protectors belong on any micro pattern travelling in a mixed tray. Ultrasonic cleaning before autoclaving clears blood and tissue from the box lock, where residue stiffens the joint across repeated cycles. Peak Surgicals supplies each pattern with a one-year warranty and return-and-replacement service.

What are the certification, bulk and OEM ordering terms?
All instruments are CE marked, manufactured under ISO 13485, and classified Class I, with documentation available for supply-chain qualification. MOQ is one piece across the range, which lets a surgeon trial a pattern before a department commits to volume. Orders above $99 ship free. OEM marking is available for distributors building private-label cardiovascular ranges, and custom orders are accepted against specification.