콘텐츠로 건너뛰기
PEAK SURGICALS
SKU(재고 관리 코드):PS-M-185
픽업 사용 가능 여부를 로드할 수 없습니다.

The Silver Guarded Lateral Osteotome is a delicate rhinoplasty bone-cutting instrument designed for controlled lateral nasal osteotomies. Its narrow 3.5mm guarded working end, slim 18cm shaft and distinctive V-shaped blade geometry provide focused access to the lateral nasal wall while supporting controlled bone cutting during rhinoplasty and nasal reconstruction procedures.
The instrument is available in three configurations: Straight, Right Curved and Left Curved. All versions measure 18cm / 7 inches overall and use the same 3.5mm working width, allowing the surgeon to select the orientation best suited to the planned lateral osteotomy pathway.
The defining feature of the Silver pattern is its V-shaped osteotome blade. This geometry helps maintain directional control as the cutting edge advances along the lateral nasal bone.
The narrow 3.5mm profile concentrates cutting force across a relatively small working area, making the instrument suitable for precise nasal bone mobilization rather than broad dorsal reduction.
The osteotome incorporates a protective guard adjacent to the cutting blade. The guard provides a reference along the outer side of the nasal bone and helps maintain the intended position of the cutting edge during advancement.
This guarded design differentiates the instrument from unguarded general osteotomes and broad double-guarded dorsum osteotomes.
Straight: Provides a direct working axis for linear lateral osteotomy approaches and can be selected where a straight trajectory is preferred.
Right Curved: Uses a directional curve for controlled access along the right lateral nasal wall.
Left Curved: Provides the corresponding mirrored geometry for the left lateral nasal wall.
The right and left versions are orientation variants rather than different instrument sizes. All three retain the same 18cm overall length and 3.5mm blade width.
The 18cm / 7-inch overall length offers a practical balance between reach and manual control during facial plastic surgery. The long, slender shaft helps keep the surgeon's hand away from the immediate operative field while maintaining a clear working axis toward the lateral nasal bone.
The primary application of the Silver pattern is controlled lateral nasal osteotomy during rhinoplasty. It may be used when the lateral nasal bones require cutting and subsequent mobilization for narrowing, repositioning or reconstructive contouring.
The instrument can be incorporated into rhinoplasty trays alongside medial osteotomes, nasal dorsum osteotomes, rasps, elevators, retractors and nasal bone forceps.
The osteotome is manufactured from stainless steel and designed for reusable professional surgical use. The rigid shaft and guarded distal end provide the structural stability required for controlled mallet-assisted bone cutting.
The cutting edge, guard, shaft and proximal striking end should be inspected before each procedure for chips, bending, deformation or excessive wear.
| Variant | Overall Length | Blade Width | Configuration |
|---|---|---|---|
| Straight | 18cm / 7" | 3.5mm | Guarded Lateral Osteotome |
| Right Curved | 18cm / 7" | 3.5mm | Directional Guarded Lateral Osteotome |
| Left Curved | 18cm / 7" | 3.5mm | Directional Guarded Lateral Osteotome |
| Product Name | Silver Guarded Lateral Osteotome |
|---|---|
| Instrument Type | Rhinoplasty Lateral Nasal Osteotome |
| Pattern | Silver |
| Overall Length | 18cm / 7" |
| Blade Width | 3.5mm |
| Available Configurations | Straight, Right Curved, Left Curved |
| Blade Profile | Delicate V-Shaped Cutting Blade |
| Guard Design | Single Guarded |
| Material | Stainless Steel |
| Reusable | Yes |
| Primary Application | Lateral Nasal Osteotomy |
| Procedural Use | Rhinoplasty / Nasal Reconstruction |
| Specialty | Plastic Surgery / Rhinoplasty / ENT |
| Brand | Peak Surgicals |
Clean and process the osteotome according to the healthcare facility's validated surgical instrument-processing procedures and applicable product-specific instructions. Inspect the 3.5mm V-shaped cutting edge, protective guard, shaft and striking surface before each use. Do not use the instrument if the guard is bent, the cutting edge is chipped or the shaft shows visible deformation.
It is designed for controlled lateral nasal osteotomy during rhinoplasty and nasal reconstruction procedures.
All configurations measure 18cm / 7 inches overall with a 3.5mm blade width.
The instrument is available in Straight, Right Curved and Left Curved configurations.
The Silver pattern uses a delicate V-shaped working blade designed to support controlled advancement during lateral osteotomy.
No. Both are 18cm long with a 3.5mm blade. The difference is the direction of curvature.
Yes. It uses a single-guarded working end.
Yes. It is intended as a reusable stainless steel surgical instrument.