Sayre Elevator 6.5" with 5mm & 9mm Blunt Tips

The Sayre Elevator 6.5" is a reusable orthopedic surgical instrument featuring two blunt working ends in different widths for controlled elevation and tissue separation during orthopedic procedures. Its double-ended configuration provides 5 mm and 9 mm blunt tips, allowing the surgeon to select the working width required for the operative area.

The current Peak Surgicals model is identified as SKU PS-000038 and has an overall length of 6½ inches. It is manufactured from German surgical stainless steel and is classified as a Premium OR reusable instrument.

Double-Ended Sayre Elevator Design

The Sayre pattern incorporates two working ends within a single instrument. This double-ended design provides different tip widths while keeping both working surfaces available without requiring a separate elevator.

Both working ends on the current Peak Surgicals model are specified as blunt, distinguishing this configuration from elevators that combine sharp and blunt ends.

5mm Blunt Working Tip

One end of the Sayre Elevator features a 5 mm blunt tip. The narrower working width provides a smaller contact surface for procedures requiring more localized elevation and controlled access.

The exact tip thickness, curvature, and edge radius are not stated on the current product page and should not be assumed from another manufacturer's Sayre pattern.

9mm Blunt Working Tip

The opposite working end measures 9 mm and is also specified as blunt. Its wider working surface provides an alternative to the 5 mm end when a broader elevator profile is required.

The 5 mm and 9 mm measurements are key purchasing specifications for identifying this particular Sayre Elevator configuration.

6½-Inch Overall Length

The current Peak Surgicals model measures 6½ inches overall. This compact orthopedic instrument length provides direct hand control while retaining two different working-tip widths within the same elevator.

Hospitals and procurement teams should use the overall length together with the 5 mm and 9 mm blunt-tip measurements when replacing an existing instrument or assembling an orthopedic elevator set.

Orthopedic Bone Elevator and Raspatory Range

Peak Surgicals lists the Sayre Elevator within its Bone Elevators and Raspatories orthopedic instrument category. The instrument can therefore be incorporated into orthopedic sets requiring a reusable double-ended elevator pattern.

The current product page does not identify a specific orthopedic procedure, bone, or anatomical region for this exact model. Procedure-specific use should therefore be determined by the operating surgeon.

German Surgical Stainless Steel

The current product specification confirms German surgical stainless steel construction. The rigid metallic structure provides the working strength required for a reusable manually operated orthopedic elevator.

The exact stainless-steel alloy grade is not stated on the current page. Buyers requiring a specific alloy designation or material certificate should confirm that information before ordering.

Premium OR Grade Instrument

Peak Surgicals identifies this Sayre Elevator as Premium OR grade. The instrument is intended for professional operating-room instrument inventories where a Sayre pattern elevator with two blunt working widths is required.

Reusable Surgical Instrument

The Sayre Elevator is specifically listed as reusable. Following clinical use, the instrument should be cleaned, inspected, and reprocessed according to applicable manufacturer instructions and the healthcare facility's validated procedures.

Before reuse, both blunt working tips, the shaft, and handle surfaces should be inspected for deformation, corrosion, surface damage, or other deterioration that could affect normal instrument function.

Product Specifications

For Orthopedic Hospitals and Instrument Procurement

The Sayre Elevator is relevant for orthopedic departments, hospitals, operating rooms, surgical centers, instrument distributors, and procurement teams sourcing reusable bone elevators and raspatories.

For accurate purchasing and inventory identification, buyers can reference SKU PS-000038 together with the 6½-inch overall length, 5 mm and 9 mm blunt tips, and German surgical stainless-steel construction. Buyers requiring exact tip thickness, curvature, handle dimensions, or stainless-steel alloy grade should confirm those specifications before ordering because they are not stated on the current Peak Surgicals page.

Frequently Asked Questions

What size is the Sayre Elevator?

The current Peak Surgicals model measures 6½ inches overall.

What tip sizes are included?

The instrument has two working ends measuring 5 mm and 9 mm.

Are the tips sharp or blunt?

Both working ends are specified as blunt.

What material is the Sayre Elevator made from?

The current product page specifies German surgical stainless steel.

Is the Sayre Elevator reusable?

Yes. Peak Surgicals specifically lists the instrument as reusable and Premium OR grade.

What is the SKU for the Sayre Elevator?

The current Peak Surgicals SKU is PS-000038.