Liston Bone Cutting Forceps – Angled

The Liston Bone Cutting Forceps – Angled are heavy-duty bone-cutting instruments designed specifically for autopsy and post-mortem dissection. Their angled working end and sharp cutting tips provide a dedicated configuration for controlled bone cutting and extraction during non-clinical anatomical and post-mortem procedures.

The current Peak Surgicals model is identified as SKU PS-000028 and is manufactured from stainless steel. The instrument is available in four overall size options: 5.5 inches, 7.5 inches, 8.5 inches, and 10 inches.

Angled Bone Cutting Forceps Design

The defining feature of this Liston pattern is its angled cutting-jaw configuration. The angled working end provides a different approach to bone compared with straight bone-cutting forceps and allows the operator to position the cutting tips according to the anatomical area being examined.

The exact degree of jaw angulation is not specified on the current product page. Buyers requiring a defined angle should confirm that specification before ordering.

Sharp Cutting Tips

The current Peak Surgicals specification identifies sharp cutting tips at the working end. These form the primary cutting component of the instrument and are intended for bone cutting during autopsy and post-mortem procedures.

The page does not provide exact jaw width, cutting-edge length, maximum jaw opening, or maximum bone thickness capacity. These measurements should therefore not be assumed from other Liston-pattern forceps.

Designed for Autopsy and Post-Mortem Use

This model is specifically listed for bone cutting during autopsy and post-mortem dissection. It is intended for anatomical and post-mortem environments where bone structures must be divided or extracted as part of the examination process.

This product is listed for post-mortem and autopsy use only and is not intended for patient use. It should therefore remain clearly separated from clinical orthopedic bone-cutting instruments in product categorization and customer-facing information.

Stainless Steel Construction

The current product description specifies stainless steel construction. The rigid metallic structure provides the mechanical strength required for a manual bone-cutting forceps.

The exact stainless-steel alloy grade is not stated on the current Peak Surgicals page. Laboratories, institutions, distributors, or procurement teams requiring a particular material specification should confirm that information before ordering.

Smooth Grip Configuration

Peak Surgicals identifies the instrument as having a smooth grip. This is part of the current listed configuration and should be preserved when distinguishing this model from Liston forceps that may use alternative handle or grip patterns.

The exact handle dimensions and surface treatment are not provided on the product page.

5.5-Inch Size

The smallest currently listed option is 5.5 inches. This provides a more compact Liston Bone Cutting Forceps configuration within the available range.

7.5-Inch Size

A 7.5-inch configuration is also listed, providing an intermediate instrument size for buyers selecting according to their post-mortem instrument-set requirements.

8.5-Inch Size

The current Peak Surgicals range also includes an 8.5-inch angled Liston Bone Cutting Forceps option.

10-Inch Size

The largest size stated on the current product page is 10 inches. Buyers should select the required instrument length according to their facility's established post-mortem instrument specifications.

Bone Cutting and Extraction

The current listing identifies the instrument for bone cutting and extraction. Its sharp angled working tips provide a purpose-built alternative to general dissecting forceps when bone structures need to be divided during post-mortem work.

The product page does not provide a numerical cutting-capacity specification, so no maximum bone thickness or hardness should be claimed for this model without additional manufacturer documentation.

Instrument Inspection and Care

Before use, the cutting jaws, joint, handles, and alignment of the instrument should be inspected. The cutting edges should remain free from visible damage, deformation, corrosion, or other deterioration that could interfere with normal operation.

Following use, the forceps should be cleaned and processed according to the facility's established post-mortem instrument-care procedures and any applicable manufacturer instructions.

Product Specifications

For Autopsy Facilities and Post-Mortem Procurement

The Liston Bone Cutting Forceps – Angled are relevant for autopsy facilities, pathology and post-mortem departments, anatomical laboratories, forensic facilities, instrument distributors, and procurement teams sourcing dedicated bone-cutting instruments for non-patient applications.

For accurate purchasing and inventory identification, buyers can reference SKU PS-000028 together with the required 5.5, 7.5, 8.5, or 10-inch size. Buyers requiring exact jaw width, jaw angle, cutting capacity, stainless-steel alloy grade, or other detailed dimensions should confirm those specifications before ordering because they are not stated on the current Peak Surgicals page.

Frequently Asked Questions

What are Liston Bone Cutting Forceps – Angled used for?

The current Peak Surgicals listing identifies them for bone cutting and extraction during autopsy and post-mortem dissection.

Are these forceps intended for surgical use on patients?

No. The current product page explicitly states that this model is intended for post-mortem and autopsy use only and is not intended for patient use.

Which sizes are available?

The current listing provides 5.5-inch, 7.5-inch, 8.5-inch, and 10-inch options.

What type of jaws does the instrument have?

The product has angled jaws with sharp cutting tips.

What material are the forceps made from?

The current Peak Surgicals listing specifies stainless steel. The exact alloy grade is not stated.

What is the SKU for the angled Liston Bone Cutting Forceps?

The current Peak Surgicals SKU is PS-000028.