Cottle Elevator 7½" Curved 5.5mm Sharp

The Cottle Elevator 7½" Curved 5.5mm Sharp is a specialized surgical elevator designed for controlled elevation and separation of tissue during nasal and septal procedures. Its curved 5.5 mm sharp working tip provides a defined configuration for working along tissue planes where precise elevation is required during rhinoplasty, septoplasty, and related reconstructive nasal surgery.

The current Peak Surgicals model is identified as SKU PS-000036. It has a confirmed overall length of 7½ inches, a 5.5 mm curved sharp tip, and is manufactured from German surgical stainless steel. The product is listed as a reusable, premium operating-room-grade surgical elevator.

7½-Inch Cottle Elevator

The current Peak Surgicals specification confirms an overall length of 7½ inches. This provides a compact surgical elevator configuration with sufficient working reach while allowing direct manual control of the distal tip.

The 7½-inch measurement is an important purchasing identifier because Cottle elevators are available in multiple lengths and working-end configurations across surgical instrument ranges.

5.5mm Curved Sharp Tip

The defining working feature of this model is its 5.5 mm curved sharp tip. The curved profile provides an angled approach to the operative tissue plane, while the sharp working edge is intended for controlled elevation and separation.

The current page clearly identifies both the 5.5 mm tip size and curved sharp configuration. Exact tip thickness, curvature radius, and blade depth are not stated and should not be assumed from other Cottle elevator models.

Designed for Septal Elevation

The Cottle elevator pattern is widely associated with nasal septal surgery. The 7½-inch curved 5.5 mm sharp configuration is documented within surgical instrument ranges for lifting and separating tissue around the nasal septum during reconstructive procedures.

The instrument may be used to assist with controlled elevation of mucosal or soft-tissue planes according to the surgeon's operative approach and the anatomy being treated.

Septoplasty Application

Cottle elevators are commonly incorporated into septoplasty instrument sets. During septal surgery, a dedicated elevator can be used when tissue must be carefully separated from underlying septal structures to obtain surgical access.

The direction and depth of elevation should be determined by the operating surgeon according to the planned septoplasty technique.

Rhinoplasty and Nasal Reconstruction

The same Cottle pattern is also used within rhinoplasty and facial reconstructive surgery. Surgical catalogs specifically list the 7½-inch curved 5.5 mm sharp Cottle elevator for facial reconstruction and septal elevation applications.

This makes the instrument relevant for rhinoplasty sets where a curved elevator is required for controlled tissue-plane access during nasal reconstruction.

Curved Working Profile

The curved working end allows the instrument to approach tissue at an angle rather than operating entirely along a straight axis. This can be useful when the surgeon needs to follow the contour of nasal structures or access a submucosal surgical plane.

The exact working angle is not specified on the current Peak Surgicals page, so a numerical curvature should not be assigned without additional product documentation.

German Surgical Stainless Steel

The current Peak Surgicals product page specifies German surgical stainless steel construction. This provides the rigid metallic structure required for a reusable surgical elevator used for controlled mechanical tissue elevation.

The exact stainless-steel alloy grade is not stated. Hospitals, ENT departments, plastic surgery centers, distributors, and procurement teams requiring a specific steel designation or material certificate should confirm that information before ordering.

Premium Operating-Room Grade

Peak Surgicals identifies this model as premium operating-room grade. The instrument is intended for professional surgical use within appropriately equipped clinical environments.

This classification should be used as the product-page specification rather than interpreted as a substitute for procedure-specific clinical or regulatory requirements.

Reusable Surgical Elevator

The current product page specifically identifies the Cottle Elevator as reusable. Following clinical use, the instrument should be cleaned, inspected, and reprocessed according to applicable manufacturer instructions and the healthcare facility's validated procedures.

Before reuse, particular attention should be given to the curved sharp tip. The working end should be checked for retained debris, dulling, deformation, corrosion, or other damage that could affect normal instrument performance.

Product Specifications

For ENT, Rhinoplasty and Surgical Procurement

The Cottle Elevator 7½" Curved 5.5mm Sharp is relevant for ENT departments, rhinoplasty and facial plastic surgery centers, hospitals, surgical instrument distributors, and procurement teams sourcing dedicated nasal elevators.

For accurate purchasing and inventory identification, buyers can reference SKU PS-000036 together with the 7½-inch overall length, 5.5 mm curved sharp tip, and German surgical stainless-steel construction. Buyers requiring exact tip thickness, curvature dimensions, instrument weight, or stainless-steel alloy grade should confirm those specifications before ordering because they are not stated on the current Peak Surgicals page.

Frequently Asked Questions

What is a Cottle Elevator used for?

The Cottle elevator pattern is commonly used for controlled elevation and separation of tissue around the nasal septum during septoplasty, rhinoplasty, and related reconstructive procedures.

What is the overall length of this Cottle Elevator?

The current Peak Surgicals model measures 7½ inches overall.

What size is the working tip?

The current product specification confirms a 5.5 mm tip.

Is the tip straight or curved?

This model has a curved sharp tip.

What material is the Cottle Elevator made from?

The current Peak Surgicals listing specifies German surgical stainless steel.

What is the SKU for this Cottle Elevator?

The current Peak Surgicals SKU is PS-000036.