Cinelli Lower Lateral Nasal Scissors 4.25"

The Cinelli Lower Lateral Nasal Scissors 4.25" are specialized rhinoplasty scissors designed for controlled cutting, reshaping, and separation of the lower lateral nasal cartilage. Their compact overall length and strong curved blades provide a dedicated configuration for nasal plastic surgery where precise access to cartilage structures is required.

The current Peak Surgicals model is identified as SKU PS-000071. It measures 4¼ inches overall and is manufactured from surgical-grade German stainless steel. The instrument is listed as reusable, premium operating-room grade, and supplied non-sterile.

4¼-Inch Cinelli Nasal Scissors

The current Peak Surgicals specification confirms an overall length of 4¼ inches. This compact instrument size provides direct manual control during procedures performed within the nasal operative field.

The 4¼-inch overall length is an important purchasing identifier when distinguishing this Cinelli pattern from longer nasal or septal scissors.

Strong Curved Blade Design

The defining working feature of this model is its strong curved blade configuration. The curved blades provide an angled cutting profile for reaching and manipulating lower lateral nasal cartilage during rhinoplasty.

The current product page does not provide exact blade length, blade width, curvature radius, tip dimensions, or cutting-edge geometry. These measurements should therefore be confirmed separately when required.

Lower Lateral Nasal Cartilage Application

Peak Surgicals specifically identifies the Cinelli scissors for cutting, reshaping, and separating lower lateral nasal cartilage. This gives the instrument a focused rhinoplasty application rather than positioning it as a general-purpose surgical scissor.

The exact amount and location of cartilage modification should be determined by the operating surgeon according to nasal anatomy, surgical planning, and the selected rhinoplasty technique.

Rhinoplasty Surgical Use

The current product description directly associates the instrument with rhinoplasty. The compact length and curved blade design make it suitable for nasal plastic surgery instrument sets requiring a dedicated cartilage-cutting scissor.

Instrument selection should remain based on the surgeon's preferred technique, required working angle, and the specific nasal structures being approached.

Surgical-Grade German Stainless Steel

The current Peak Surgicals listing specifies surgical-grade German stainless steel construction. The rigid metallic structure supports repeated professional handling and the mechanical requirements of a dedicated cartilage-cutting instrument.

The exact stainless-steel alloy grade is not stated on the current page. Hospitals, surgical centers, distributors, and procurement teams requiring a particular alloy designation or supporting material documentation should confirm that information before ordering.

Premium Operating-Room Grade

The live product specification identifies this instrument as Premium Operating Room grade. This is the quality designation currently assigned to PS-000071 on the Peak Surgicals storefront.

This designation should not be interpreted as a substitute for procedure-specific validation or compatibility requirements established by the healthcare facility.

Reusable Surgical Instrument

The Cinelli Lower Lateral Nasal Scissors are listed as reusable. The current page also states that the stainless-steel instrument is corrosion resistant and suitable for repeated sterilization.

Following clinical use, the blades, joint, handles, and all instrument surfaces should be cleaned, inspected, and reprocessed according to applicable manufacturer instructions and the healthcare facility's validated procedures.

Supplied Non-Sterile

The current Peak Surgicals specification identifies the instrument as non-sterile when supplied. Appropriate processing should therefore be completed before clinical use according to the facility's instrument-reprocessing protocol and manufacturer guidance.

The live page does not provide specific sterilization-cycle temperatures, exposure times, or packaging instructions, so those parameters should not be assumed.

Product Specifications

For Rhinoplasty Centers and Surgical Procurement

The Cinelli Lower Lateral Nasal Scissors are relevant for plastic surgery departments, rhinoplasty centers, ENT and facial plastic surgery services, hospitals, surgical instrument distributors, and procurement teams sourcing specialized nasal cartilage scissors.

For accurate purchasing and inventory identification, buyers can reference SKU PS-000071 together with the 4¼-inch overall length, strong curved blades, and German stainless-steel construction. Buyers requiring exact blade length, blade width, curvature dimensions, tip geometry, or stainless-steel alloy grade should confirm those specifications before ordering because they are not stated on the current Peak Surgicals page.

Frequently Asked Questions

What are Cinelli Lower Lateral Nasal Scissors used for?

The current Peak Surgicals listing identifies them for cutting, reshaping, and separating lower lateral nasal cartilage during rhinoplasty.

What is the overall length?

The current model measures 4¼ inches overall.

What type of blades do the scissors have?

The current Peak Surgicals specification identifies strong curved blades.

What material are the scissors made from?

The instrument is made from surgical-grade German stainless steel. The exact alloy grade is not stated.

Are the scissors reusable?

Yes. Peak Surgicals lists PS-000071 as a reusable instrument suitable for repeated sterilization.

Are the scissors supplied sterile?

No. The current product specification identifies them as non-sterile.