Cross-Fit Screw Locking Dia 2.0 Titanium

Cross-Fit Screw Locking Dia 2.0 Titanium

The Cross-Fit Screw Locking Dia 2.0 Titanium is an orthopedic locking screw available in a defined range of lengths while maintaining a consistent 2.0 mm diameter. The current Peak Surgicals range provides ten selectable configurations from 6 mm through 24 mm, allowing orthopedic teams and procurement departments to identify the required screw length by its individual catalog code.

The main Peak Surgicals product is identified as SKU PS-OP-7501. The product title specifies titanium, and the live page provides individual item codes for every listed diameter-and-length combination.

2.0mm Cross-Fit Locking Screw

Every configuration listed on the current product page has a nominal diameter of 2.0 mm. The available variation is the screw length, which increases in 2 mm increments from 6 mm to 24 mm.

The 2.0 mm diameter should be considered together with the required length and compatibility with the intended orthopedic fixation system before ordering.

Titanium Orthopedic Screw

The current Peak Surgicals product title identifies this Cross-Fit locking screw as titanium. This material designation forms part of the product identity and should be referenced when selecting the screw for an orthopedic implant inventory.

The exact titanium alloy or grade is not stated on the current product page. Hospitals, distributors, and procurement teams requiring a particular titanium specification or material certificate should confirm that information before purchase.

Locking Screw Configuration

The product is specifically identified as a locking screw. Locking screws are selected as part of compatible orthopedic fixation systems where the screw configuration must match the associated implant or plate design.

The current Peak Surgicals page does not state the exact compatible plate family, locking-thread geometry, head diameter, thread pitch, driver type, or torque specification. These technical compatibility details should therefore be confirmed before use.

6mm Length – PS-2020.006

The shortest listed configuration is 2.0 × 6 mm, identified by catalog code PS-2020.006.

8mm Length – PS-2020.008

The 2.0 × 8 mm configuration is identified as PS-2020.008.

10mm Length – PS-2020.010

The 2.0 × 10 mm locking screw is listed under catalog code PS-2020.010.

12mm Length – PS-2020.012

The 2.0 × 12 mm configuration is identified as PS-2020.012.

14mm Length – PS-2020.014

The 2.0 × 14 mm Cross-Fit locking screw is listed as PS-2020.014.

16mm Length – PS-2020.016

The 2.0 × 16 mm configuration is identified by catalog code PS-2020.016.

18mm Length – PS-2020.018

The 2.0 × 18 mm locking screw is listed as PS-2020.018.

20mm Length – PS-2020.020

The 2.0 × 20 mm configuration is identified as PS-2020.020.

22mm Length – PS-2020.022

The 2.0 × 22 mm Cross-Fit screw is listed under catalog code PS-2020.022.

24mm Length – PS-2020.024

The longest configuration currently listed is 2.0 × 24 mm, identified as PS-2020.024.

Orthopedic Fixation Selection

The available 6–24 mm length range allows surgical and procurement teams to identify the required Cross-Fit locking screw configuration according to the orthopedic fixation system being used.

Length selection, implant compatibility, and surgical use should be determined according to the relevant fixation system and operative requirements. The current Peak Surgicals page does not provide anatomical indications or identify a particular plate family for this screw.

Product Specifications

Product Name	Cross-Fit Screw Locking Dia 2.0 Titanium
Main SKU	PS-OP-7501
Product Type	Orthopedic Locking Screw
Material	Titanium
Diameter	2.0 mm
PS-2020.006	2.0 × 6 mm
PS-2020.008	2.0 × 8 mm
PS-2020.010	2.0 × 10 mm
PS-2020.012	2.0 × 12 mm
PS-2020.014	2.0 × 14 mm
PS-2020.016	2.0 × 16 mm
PS-2020.018	2.0 × 18 mm
PS-2020.020	2.0 × 20 mm
PS-2020.022	2.0 × 22 mm
PS-2020.024	2.0 × 24 mm
Length Range	6–24 mm
Titanium Grade	Not Specified on Current Product Page
Thread Pitch	Not Specified on Current Product Page
Compatible Plate System	Not Specified on Current Product Page

For Orthopedic Hospitals and Implant Procurement

The Cross-Fit Screw Locking Dia 2.0 Titanium range is relevant for orthopedic departments, hospitals, implant distributors, surgical centers, and procurement teams sourcing 2.0 mm locking screws in multiple lengths.

For accurate purchasing, buyers should reference main SKU PS-OP-7501 together with the required individual catalog code and screw length. Buyers requiring exact titanium alloy, thread pitch, head dimensions, driver interface, compatible plate family, or implant-system specifications should confirm those details before ordering because they are not stated on the current Peak Surgicals page.

Frequently Asked Questions

What diameter is the Cross-Fit Locking Screw?

All configurations listed on the current Peak Surgicals page have a diameter of 2.0 mm.

Which lengths are available?

The current listing provides 6, 8, 10, 12, 14, 16, 18, 20, 22, and 24 mm lengths.

What material is the screw made from?

The product title specifies titanium. The exact titanium alloy grade is not stated.

What is the main SKU?

The current storefront SKU is PS-OP-7501.

What is the catalog code for the 16mm screw?

The 2.0 × 16 mm configuration is identified as PS-2020.016.

Does the page specify the compatible plate system?

No. The current product page does not identify the exact compatible plate family, thread pitch, locking-head geometry, or driver specification. These details should be confirmed before ordering.